Usbstick 3D model for printing: 36 results found

Displaying 1 - 32 of 36
  • Free
  • Just another USB-holder. It's for 7+1 USB-sticks, 4 SD-cards and 6 microSD-cards.
    Category: none
    Tags
    6511Free

    USB, SD, and Micro SD card holder

    USB, SD, and Micro SD card holderpinshape.com
    I was looking for a way to keep up with my growing memory card collection for my Raspberry Pi. This is my variation of a design by MakeGyver on Thingiverse http://www.thingiverse.com/thi... [1].. I brought it into 123D design, and duplicated it, and melded the two pieces together into one STL file. Then I noticed that there was a customizer available that would probably do the same thing. Doh!. Anyway, it suits my needs perfectly as it is.Highly recommended as a way to use up those small end pieces of filament that seem to accumulate over time. That's what I did at the base of the holder; then put a  longer piece in the printer to finish it up. Printed with PLA, .2mm layers, 30% infill, took about 2.5 hours @ 40mm/sec.[1] http://www.thingiverse.com/thing:674303
    Category: none
    Tags
    153Free

    USB cover (Keyring)

    USB cover (Keyring)pinshape.com
    My memory stick plastic broke so I could no longer have it on my keys. So I've made a small cover for the usb end which has a loop on it so I can attach it to my keyring.
    Category: none
    Tags

    Drachenberg USB Drive

    Drachenberg USB Drivemyminifactory.com
    Universal Serial Bus? More like Ultimate Sword Blade!
    Category: none
    Tags

    USB drive and SD card holder

    USB drive and SD card holderthingiverse.com
    This is a remix of https://www.thingiverse.com/thing:568657 I needed a few more USB slots and needed them farther apart. I also need much fewer micro
    Tags
    5111Free

    USB memory and its cap holder

    USB memory and its cap holderthingiverse.com
    USB memory stick device holder. It has cap holder.
    Category: none
    Tags
    271Free

    Easy to print USB/SD holder

    Easy to print USB/SD holderpinshape.com
    Here is our easy-to-print USB and SD card holder exclusively designed by 3DEX ltd. We designed this as we had many USB sticks and SD cards lying around. Using our holder we can store our sticks and cards in a neat way on our desks. We hope that you'll be equally inspired to print our design . Best of all, our USB holder is simple and quick to print. We used a layer height of 0.2mm but the smaller the layer height the better quality the print. We used an infill of 20% but this could be reduced to save time and filament. Print speed was 70mm/s and shell thickness was 0.8mm. Using these settings the total print time was less than 30 mins. We printed our design in Yellow PLA plastic available from our online store here:http://www.3dexfilament.co.uk/product.php?id=7 [1]The benefits of using our filament is that it is very high quality meaning that you'll experience great print quality. Our filament benefits from tolerances of only ±0.03mm; consistent melting temperatures; minimal moisture absorption; and vibrant colours. We are sure that you'll love printing this our filament. We hope you enjoy our 3D printable designs and we look forward to publishing more designs for you.Regards,3DEX ltd[1] http://www.3dexfilament.co.uk/product.php?id=7
    Category: none
    Tags
    192Free

    Easy to print USB Holder

    Easy to print USB Holderthingiverse.com
    ​Here is our easy-to-print USB and SD card holder exclusively designed by 3DEX ltd. We designed this as we had many USB sticks and SD cards lying ar
    Category: none
    Tags
    7105Free

    USB plug/flash thumb drive cap

    USB plug/flash thumb drive capthingiverse.com
    *** Consider using version 2 instead: http://www.thingiverse.com/thing:592405 That version fits better and has a vent hole. Originally designed as a
    Category: none
    Tags
    8184Free

    USB plug/flash drive cap v2

    USB plug/flash drive cap v2thingiverse.com
    USB plug/flash drive cap v2
    Category: none
    Tags
    9236Free
    My secure usb stick holder which also keeps the usb caps safe
    Category: none
    Tags
    140Free

    17x USB Flash drive holder ying yang laser cut acrylic design

    17x USB Flash drive holder ying yang laser cut acrylic designthingiverse.com
    my ying&yang flash drive holder. Mein USB-Strickhalter, für 17 Sticks. Schöne und schwere Ausführung aus Plexiglas. Auf jedem Sc
    Category: none
    Tags
    10595Free

    ScamDisk (for Teensy 3.1)

    ScamDisk (for Teensy 3.1)thingiverse.com
    The ScamDisk is a 3D-printable enclosure for the Teensy 3.1 microcontroller that attempts to disguise it as a (slightly oversized) USB storage device.
    Category: none
    Tags
    1999Free

    USB, SD, Micro SD holder

    USB, SD, Micro SD holderthingiverse.com
    Small desk organizer can hold 4 USB sticks, 2 SD cards, and 2 micro SD cards.
    Category: none
    Tags
    17123Free

    Another SD/USB holder...

    Another SD/USB holder...thingiverse.com
    This is just another variation of the SD chip / USB organizer. I found that with most, I had trouble getting a hold on the SD chips so I made a versio
    Category: none
    Tags
    13157Free

    LaCie LabelKey - USB Repaire

    LaCie LabelKey - USB Repairethingiverse.com
    LaCie LabelKey - USB Repaire
    Category: none
    Tags
    4150Free

    Drachenberg USB Drive

    Drachenberg USB Drivecults3d.com
    Universal Serial Bus? More like Ultimate Sword Blade!
    Category: none
    Tags

    Bling USB Robot by Dr. Fluff

    Bling USB Robot by Dr. Fluffthreeding.com
    This retrotastic 3d printed robot has a slot for a USB pen drive. Print him in precious metals or plastic and add him to your key ring for instant retro cool. Fits kingston DTSe9 usb pendrive (not included) http://www.amazon.com/Kingston-Digital-DataTraveler-DTSE9H-16GBZET/dp/B00DYQYITG [1] .[1] http://www.amazon.com/Kingston-Digital-DataTraveler-DTSE9H-16GBZET/dp/B00DYQYITG
    Category: JEWELRY / Pendant
    Tags
    11421Free

    R2D2 USB Flash Drive

    R2D2 USB Flash Drivethingiverse.com
    This is a usb flash drive in the shape of r2d2. the original body was by MacarenaGB. The inside container is for my flash drive, so if you download it
    Category: none
    Tags
    9674Free
    A simple organizer for my USB-Sticks
    Category: none
    Tags
    10555Free
    Keeps your important USB sticks and Bluetooth receivers on-hand. The cap is carefully designed to prevent the USB device from slipping loose. It wo
    Category: GADGETS / Keychain
    Tags
    5696Free

    USB thing holder with center hole for magnet

    USB thing holder with center hole for magnetthingiverse.com
    Remix of USB thing holder by ghostling (http://www.thingiverse.com/thing:19703). I modified the center hole to fit either a 0.5inch or 10mm magnet a
    Category: none
    Tags
    151.7KFree

    Battery and USB holder

    Battery and USB holderthingiverse.com
    I needed a place for all my loose rechargeable batteries and thumb drives, so I threw this together. Enjoy!
    Category: ELECTRONICS / Battery
    Tags
    13219Free
    Tidy up your pendrives and USB devices Stores 10x USB pendrives in a horizontal rack. Printed with 40% infill
    Category: none
    Tags
    5562Free

    Vazdelar USB flash drive holder

    Vazdelar USB flash drive holdernunus-world.com
    Vazdelar USB flash drive holderVazdelar USB flash drive holder [1] by Davicious [2] is licensed under the Creative Commons - Attribution - Share Alike [3] license.[1] http://www.thingiverse.com/thing:718830[2] http://www.thingiverse.com/Davicious[3] http://creativecommons.org/licenses/by-sa/3.0/
    Category: none
    Tags

    USB sleeve – Vazdelar

    USB sleeve – Vazdelarnunus-world.com
    a usb snap in sleeve for kingston usb flash drive.USB sleeve - Vazdelar [1] by Davicious [2] is licensed under the Creative Commons - Attribution - Share Alike [3] license.[1] http://www.thingiverse.com/thing:730123[2] http://www.thingiverse.com/Davicious[3] http://creativecommons.org/licenses/by-sa/3.0/
    Category: none
    Tags
    Made by a PLTW student to hold usb flash drives or sd cards.USB Holder [1] by Corosis [2] is licensed under theCreative Commons - Attribution [3] license.[1] http://www.thingiverse.com/thing:700129[2] http://www.thingiverse.com/Corosis[3] http://creativecommons.org/licenses/by/3.0/
    Category: none
    Tags
    Designed by NuNus3D Online STL Creator"
    Category: none
    Tags
    313Free

    Cap kingston usb key

    Cap kingston usb keythingiverse.com
    Cap for the new style kingston usb key (polygon ending)
    Category: none
    Tags
    3209Free
    A place to put your usb/sdcards btw sdcards go in the side
    Tags
    2116Free