Terminator 3D model for printing: 106 results found

Displaying 1 - 32 of 106
  • Free
  • T800 3D Model
    Category: none
    Tags

    Superhero robocop 3D Model

    Superhero robocop 3D Model3dexport.com

    M134 machine gun 3D Model

    M134 machine gun 3D Model3dexport.com
    M134 machine gun 3D Model
    Category: none
    Tags

    TERMINATOR LOW POLY 3D Model

    TERMINATOR LOW POLY 3D Model3dexport.com
    TERMINATOR LOW POLY 3D Model
    Category: none
    Tags

    Terminatrix-T3 3D Model

    Terminatrix-T3 3D Model3dexport.com
    Terminatrix-T3 3D Model
    Category: none
    Tags

    Robot SGX-640 3D Model

    Robot SGX-640 3D Model3dexport.com
    Robot SGX-640 3D Model
    Category: none
    Tags

    Arnold/T-800 remix

    Arnold/T-800 remixcults3d.com
    Since Arnold hates Trump I was wondering if I should make something that he can destroy of trump...any ideas???
    Category: none
    Tags

    Terminator Robot Motorcycle 3D Model

    Terminator Robot Motorcycle 3D Model3dexport.com
    Terminator Robot Motorcycle 3D Model
    Category: none
    Tags

    Terminator T-800 Skull Bust 3D Model

    Terminator T-800 Skull Bust 3D Model3dexport.com
    Terminator T-800 Skull Bust 3D Model
    Category: none
    Tags
    250Free

    Terminator T-800 Torso Bust 3D Model

    Terminator T-800 Torso Bust 3D Model3dexport.com
    Terminator T-800 Torso Bust 3D Model
    Category: none
    Tags
    200Free

    Terminator With LED's

    Terminator With LED'sthingiverse.com
    I got fed up of trying to hollow out the various T800 designs on here, so thought I'd remix this one. I've replaced the square LED's wi
    Category: none
    Tags
    2112Free

    Terminator arm that works 3D print model

    Terminator arm that works 3D print modelcgtrader.com
    This is a 3D printable terminator arm replica based on Terminator 1.I modified the original design to be easy to 3D print, but also so that each fingercould open and close using only one spring. I did this by using levers similar to theTerminator 1 version. the wrist movement is also controlled by springs and strings.By attaching gut to a glove or motors, the fingers can easily be opened and closed.Included in this download:1- A colour coded build guide in PDF format.2- A mini print-in-1 version.3- All parts named and ready to print.4- Smoothed and unsmoothed parts.5- Assembled arm and all parts in 3ds Max and obj format.You will need a few springs, screws, gut, wire and a lot of time, so have fun & enjoy!The base and control system is now also available to download in my products.
    Category: none
    Tags

    The printable model Arnold Schwarzenegger 3D Model

    The printable model Arnold Schwarzenegger 3D Model3dexport.com
    The printable model Arnold Schwarzenegger 3D Model
    Category: none
    Tags

    Terminatorharvester 3D Model

    Terminatorharvester 3D Model3dexport.com
    Terminatorharvester 3D Model
    Category: none
    Tags

    Terminator Genisys T-800 Skull Bust 3D Model

    Terminator Genisys T-800 Skull Bust 3D Model3dexport.com
    Terminator Genisys T-800 Skull Bust 3D Model
    Category: none
    Tags
    110Free

    Su37 Terminator 3D Model

    Su37 Terminator 3D Model3dexport.com

    T800 Portrait model 3D Model

    T800 Portrait model 3D Model3dexport.com
    T800 Portrait model 3D Model
    Category: none
    Tags

    3d model Arnold body Hair and Fur 3D Model

    3d model Arnold body Hair and Fur 3D Model3dexport.com
    3d model Arnold body Hair and Fur 3D Model
    Category: none
    Tags

    Terminator arm control 3D print model

    Terminator arm control 3D print modelcgtrader.com
    Terminator arm control 3D print model
    Category: none
    Tags

    Cyborg Arm 3D print model

    Cyborg Arm 3D print modelcgtrader.com
    Includes 25 printable items!!
    Category: none
    Tags

    Jetboy 3D print model

    Jetboy 3D print modelcgtrader.com
    Jetboy 3D print model
    Category: none
    Tags

    T-800 Single and 3 Piece High Detail Head

    T-800 Single and 3 Piece High Detail Headcults3d.com
    UpdatedFixed the Jaw sitting flat on the plate (if it's not flat still for you, use the lay flat feature - in makerware its flat on layer 0.1.) also added the full 38mb hi-res skull as requested. I have made the pipes Fatter! I was tired of them being too weak when printed small, so I increased the thickness of all the pipes by 2mm.This is a remix of my other smoothed T-800, which was remixed from ToScH's one, but I went a bit further this time. I made it even higher res, with more detail (literally sculpted out pieces) and then split it into 3 pieces, but they were split for printing specifically with little supports and to fix areas where a full print can fail, like the mouth/jaw pipes. Now you can print them the other way around. I also cut the slices so they would not interfere with the facial geometry. I removed all the supports that were under the chin so it's as is now, so you could print it upsidown or normally, up to you. I cut the back of the cranium out so you can put led lights in easily to the eyes. If the like button gets clicked enough I might even cut out the eyes and make them all seperate and also add the CPU core screw cap :)Remix from ToScH & Landru
    Category: none
    Tags
    100Free

    tête de T-800 entière et en 3 pièces

    tête de T-800 entière et en 3 piècescults3d.com
    ActualiséFixé la mâchoire à plat sur la plaque (si elle n'est pas encore plat pour vous, utilisez la fonctionnalité de lay lay - dans makerware son plat sur la couche 0.1.) A également ajouté le crâne de haute résolution de 38mb comme demandé. J'ai fait les tuyaux Fatter! J'étais fatigué d'être trop faible quand imprimé petit, donc j'ai augmenté l'épaisseur de tous les tuyaux de 2mm.Il s'agit d'un remix de mon autre T-800 lissé, qui a été remixé de ToScH, mais je suis allé un peu plus loin cette fois. Je l'ai fait encore plus haut, avec plus de détails (littéralement sculpté des morceaux), puis divisé en 3 morceaux, mais ils ont été divisés pour l'impression spécifiquement avec peu de supports et de fixer les zones où une pleine impression peut échouer, comme la bouche / mâchoire Tuyaux Maintenant, vous pouvez les imprimer à l'envers. J'ai également coupé les tranches de sorte qu'elles n'interféreraient pas avec la géométrie faciale. J'ai enlevé tous les supports qui étaient sous le menton donc c'est comme est maintenant, ainsi vous pourriez l'imprimer upsidown ou normalement, jusqu'à vous. J'ai coupé l'arrière du crâne de sorte que vous pouvez mettre les lumières LED dans facilement aux yeux. Si le bouton similaire obtient cliqué assez je pourrais même couper les yeux et les faire tous séparés et aussi ajouter le bouchon à vis du noyau CPU :)Remix de ToScH & Landru
    Category: none
    Tags

    T-800 Damage Bust (28MB)

    T-800 Damage Bust (28MB)cults3d.com
    *no supports required*Small infill required, 2-5%, but can be printed at 0% infill if the total height of the print does not exceed 7cm)When I was about 10, I made one of these out of clay, and said to myself one day I would have a full size one, and well, it may not be able to print out 1:1 on my printer, but some lucky person out there will :) and while I can't print it 1:1, I can print it big enough to install all the led lights etc. This is the T-800 smoothed hi res version inside a sculpted head, so when it prints out the actual exoskeleton parts SHOULD print as smooth as the skin.Since I was going about cutting up an entire exoskeleton, I thought I would have some fun with the skull, and make the damage combination of Arnold and the T800. I have to apologize for my Arny face! would be one of the first times I have really tried to sculpt a face to look like a particular person rather than a re-sculpt, or making an alien etc... So I hope I did enough justice to his face to make it look enough like him. The hair I settled for strips of clay, and I had trouble giving him the messed hair look from T1, so I gave him the slick haircut from T2 :) much easier to sculpt.
    Category: none
    Tags
    A Blood Angel Terminator mini from the Space Hulk game.Hand-painted.Scanned with a Nikon D750 + 360 recap, no clean-up.
    Category: none
    Tags

    Librarian Calistarius

    Librarian Calistariussketchfab.com
    A Blood Angel Terminator mini from the Space Hulk game. Hand-painted. Scanned with a Nikon D750 + 360 recap, no clean-up.
    Category: none
    Tags
    Another Blood Angel Terminator from the Space Hulk game. Hand-painted, scanned with Nikon D750 + 360 recap, no clean-up.
    Category: none
    Tags