Le pistolet blaster SE-14C a été utilisé pendant le règne de l'Empire Galactique. Il a tiré des éclats de cinq tours, ce qui était utile dans les quarts-quarts de combat. Le pistolet avait également deux portées qui ont été utilisées pour différentes options de tir. Http://starwars.wikia.com  Http://starwars.wikia.com
E-22 (Modifié E-11) Fusil Blaster de Rogue One SHORETROOPERSDes soldats d'assaut spécialisés stationnés au sommet du quartier général militaire impérial sur Scarif, les patrouilleurs patrouillent les plages et les bunkers de l'installation planétaire.
The DT-12 heavy blaster pistol was a model of blaster pistol. A DT-12 was used by the bounty hunter Greedo during his confrontation with the smuggler Han Solo at Chalmun's Cantina.http://starwars.wikia.com  http://starwars.wikia.com
The DT-12 heavy blaster pistol was a model of blaster pistol. A DT-12 was used by the bounty hunter Greedo during his confrontation with the smuggler Han Solo at Chalmun's Cantina.http://starwars.wikia.com  size 211 mm model cut to parts http://starwars.wikia.com
are you ready for serious 3D printing? attention to a very large length of 1660 millimeters weapons.handle 137 mm/ adapts to your 3D printer! .model cut into logical parts. The DLT-19 was not as popular or as well-known as the standard-issue E-11 blaster rifle, because it took longer to assemble and load. However the DLT-19 was much more powerful and had a much greater range than the E-11 model. The E-11s sniper rifle bore a striking resemblance to this weapon with the addition of a scope. In this configuration it could shoot down swoops, or even light airspeeders. http://starwars.wikia.com/wiki...  http://starwars.wikia.com/wiki/DLT-19_heavy_blaster_rifle/Legends
I made a First Order Stormtrooper Helmet that can be printed in 8 sections on a Makerbot Replicator 2 style printer. It's a really material efficient design. I've made the support and printed out the parts already to proof out the design. Print out your helmet now and join order!Printing Suggestions:-Use material that doesn't have a tendency to warp as the seams will need to meet up well-Slow your machine down to at least half it's max print speed. -Use painters tape to hold parts together and super glue them in place.-Use epoxy to strengthen the seams or your own choice of material to strengthen the seams. Just make sure to strengthen the seams.-Have fun Printing!!!
size 1185.427 mm . model is cut into pieces. The DLT-20A laser rifle was a model of laser rifle  produced by BlasTech Industries .Members  of the Galactic Empire's  Stormtrooper Corps  sometimes used DLT-20As instead of their standard issue E-11 blaster rifles .  The droid  bounty hunter  IG-88 sometimes used this model of rifle, and carried one with it when on board theExecutor-class Star Dreadnought Executor  answering the Sith Lord  Darth Vader's summons.  Another type of rifle , the pulse cannon , utilized the frame assembly of a DLT-20A.  http://starwars.wikia.com/wiki...  http://starwars.wikia.com/wiki/Laser_rifle/Canon?veaction=edit&redlink=1 http://starwars.wikia.com/wiki/BlasTech_Industries http://starwars.wikia.com/wiki/Stormtrooper http://starwars.wikia.com/wiki/Galactic_Empire http://starwars.wikia.com/wiki/Stormtrooper_Corps http://starwars.wikia.com/wiki/E-11_blaster_rifle http://starwars.wikia.com/wiki/DLT-20A_laser_rifle#cite_note-RVG-0 http://starwars.wikia.com/wiki/Droid http://starwars.wikia.com/wiki/Bounty_hunter http://starwars.wikia.com/wiki/IG-88 http://starwars.wikia.com/wiki/Executor-class_Star_Dreadnought http://starwars.wikia.com/wiki/Executor http://starwars.wikia.com/wiki/Sith_Lord http://starwars.wikia.com/wiki/Anakin_Skywalker http://starwars.wikia.com/wiki/DLT-20A_laser_rifle#cite_note-ESB-1 http://starwars.wikia.com/wiki/Rifle http://starwars.wikia.com/wiki/Pulse_cannon http://starwars.wikia.com/wiki/DLT-20A_laser_rifle#cite_note-BF-2 http://starwars.wikia.com/wiki/DLT-20A_laser_rifle
SE-14C blaster pistol 3D print modelThe SE-14C blaster pistol saw use during the reign of the Galactic Empire. It fired bursts of five rounds, which was useful in close-quarters combat. The gun also had two scopes that were used for different firing options. http://starwars.wikia.com  size wth out optic 350mm and 3d model cut to parts http://starwars.wikia.com
I have printed a few out, but everyone who saw one wanted them :p should have taken photos... I'll run another batch off tomorrow.I suggest printing it out at 0.2mm, I find 1 shell is ok and about 10% infill, but that's purely to make it a bit tougher. If you print lower than 0.3mm, say 0.4mm the Imperial Logos will not come out so great, so really I would not recommend printing this at chunkier than 0.3mm.