Spoolmount 3D model for printing: 66 results found

Displaying 1 - 32 of 66
  • Free
  • Spool holder inspired by a regular purse hook, works fine with a water bottle inside the spool and some plastic tie straps to hold it in place.
    Category: none
    Tags

    SPANNERHANDS enclosed Spool System Wall Mounted

    SPANNERHANDS enclosed Spool System Wall Mountedpinshape.com
    A completely enclosed spool holder, with a desiccant sachet pocket.Designed to fit Fillamentum spools.Follow me on twitter for updates.@SpannerHands3D https://twitter.com/SpannerHands3D [1]Work in progress as more mounting options to be included.All v2_0 parts have been printed and tested for fit.Parts List:2 x id 8mm od 22mm (608) bearings12 x M3 10mm + Nuts (nuts optional)1 x M8 80mm threaded rod + Nuts (nuts optional)1 x Threaded Bowden Coupling (optional but recommended)1 x Length PTFE Bowden Tubing (optional but recommended)Material Considerations:FLEX_SEAL_v2_0.stl (use Flexible filament with hardness 92 ShA)Print with low infill. 10%SEMI_FLEX_CLASP_v2_0.stl (use semi-flexible filament with hardness 98 ShA)Print with high infill. 80%Compatible spools:(OD 200mm ID 53mm)If you are unable to print the flexible components they will be available soon from:-http://www.spannerhands.co.uk/ [2][1] https://twitter.com/SpannerHands3D[2] http://www.spannerhands.co.uk/
    Category: none
    Tags
    16642Free

    Wall Mounted Spool Holder

    Wall Mounted Spool Holderthingiverse.com
    Mounts with 2 screws, and fits within the pictured scrapbooking box for dry filament storage. Easily scaled for wider spools or spools with smaller op
    Category: none
    Tags
    633Free

    80mm Cradle for Small Printbeds (120x120x120mm)

    80mm Cradle for Small Printbeds (120x120x120mm)thingiverse.com
    This is just a breakdown (with attachment supports) for henryarnold's Airtight Filament Canister's 80mm Spool Holder http://www.thingiverse.
    Category: none
    Tags
    847Free

    Monoprice Select Mini Spool Roller

    Monoprice Select Mini Spool Rollerthingiverse.com
    This attachment allows the spool to spin freely on the Monoprice Maker Select Mini (Malyan M200). Reducing stress on the spool side should give you on
    Category: none
    Tags
    5725Free

    Octave Spool Holder

    Octave Spool Holderpinshape.com
    A spool holder for Octave brand filament, which is sold on Amazon. Contains a shaft and washer, both with holes for a 1/4 in. dia. bolt. While it is designed for a Lulzbot AO-101, it should work on any printer that has a ~ 1/4 in. hole.Shaft Diameter: 1.2 in.Shaft Length: 3.6 in.Washer Diameter: 2.3 in.Hole Diameter: 0.25 in.
    Category: none
    Tags

    Freestanding filament spool roller V2

    Freestanding filament spool roller V2thingiverse.com
    This is a remix of http://www.thingiverse.com/thing:1070481 REQUIRED, 4 x 608ZZ type bearings I made a few changes. First, I added legs for free stand
    Category: none
    Tags
    7143Free

    Multi-size Spool Tri-Adapter Roller Axle

    Multi-size Spool Tri-Adapter Roller Axlethingiverse.com
    ... I give you the Tri-Adapter Axle. I started by measuring the inside diameter of the spools that I had. I came up with 4 common sizes, all included
    Category: none
    Tags
    5240Free

    Overhead spool holder - Migbot Prusa i3 - 8mm Acrylic frame

    Overhead spool holder - Migbot Prusa i3 - 8mm Acrylic framethingiverse.com
    Overhead spool holder - Migbot Prusa i3 - 8mm Acrylic frame
    Category: none
    Tags
    3337Free

    Rostock Max V2 Spool Arm (Full Length and Extra Rounded)

    Rostock Max V2 Spool Arm (Full Length and Extra Rounded)thingiverse.com
    Rostock Max V2 Spool Arm (Full Length and Extra Rounded)
    Category: none
    Tags
    2158Free

    SEUTec Spool Roller

    SEUTec Spool Rollerpinshape.com
    Standard (one size fits all, or not) and parametric Spool Roller created using OpenSCAD. Print 4 pieces, add bearings and bolts (M6x20mm) and appli anti-slip band on the base. Designed to fit with spools from Taulman, Sakata 3D Ink, igus, NinjaFlex, colorFabb, FormFutura, and more.
    Category: none
    Tags

    Spool Holder with filament speed sensor W/ Creator Pro adaptor

    Spool Holder with filament speed sensor W/ Creator Pro adaptorthingiverse.com
    This is a filament spool holder with optical speed pick-up that can rest on any flat surface or be attached to the back of a Flashforge Creator Pro wi
    Category: none
    Tags
    26186Free

    FrankenForge! - 52mm Spool Holder for FlashForge Creator Pro & Clones

    FrankenForge! - 52mm Spool Holder for FlashForge Creator Pro & Clonesthingiverse.com
    FrankenForge! - 52mm Spool Holder for FlashForge Creator Pro & Clones
    Category: none
    Tags
    7194Free

    PVC Filament Spool Rack

    PVC Filament Spool Rackthingiverse.com
    A PVC filament spool rack that only requires two PVC pipes (1/2" and a 3/4") and some CA glue or a soldering/burning iron to weld the parts
    Category: none
    Tags
    9130Free

    "On-rod" spool mount cone

    "On-rod" spool mount conethingiverse.com
    "On-rod" spool mount cone
    Category: none
    Tags
    870Free
    A small 1/4" retaining clip. A 1/4" rod fits perfectly through skate bearings. I used them to build my spool holder.
    Category: none
    Tags
    1235Free

    Prusa I3 (6mm Aluminum frame) spool holder

    Prusa I3 (6mm Aluminum frame) spool holderthingiverse.com
    Prusa I3 (6mm Aluminum frame) spool holder
    Category: none
    Tags
    9402Free

    Additional Spool Caps for Filament Spool Wall Hanger

    Additional Spool Caps for Filament Spool Wall Hangerthingiverse.com
    Additional Spool Caps for Filament Spool Wall Hanger
    Category: none
    Tags
    957Free

    Filament spool rest for a Folger RepRap 2020 Prusa i3

    Filament spool rest for a Folger RepRap 2020 Prusa i3thingiverse.com
    A filament spool rest for a Folger Technologies RepRap Prusa i3. This rest is intended to allow the spool to turn more freely than when resting direct
    Category: none
    Tags
    13125Free

    Customizeable Flashforge Creator Pro Easy Spool Holder

    Customizeable Flashforge Creator Pro Easy Spool Holderthingiverse.com
    This customizable spool holder fits those Flashforge Creator Pro 3D printers models that come two horizontal slots at the back. This design uses a ne
    Category: none
    Tags
    21261Free

    Side Spool Clip for CTC 3d / Flashforge

    Side Spool Clip for CTC 3d / Flashforgethingiverse.com
    Updates: Current version (0.01) tested and works fine with 50% of my spools, the arm is however too thick for some of my smaller spools. Re-Sized vers
    Category: none
    Tags
    671Free

    Rounded spool bar for MakerFarm Pegasus

    Rounded spool bar for MakerFarm Pegasusthingiverse.com
    Rounded spool bar for MakerFarm Pegasus
    Category: none
    Tags
    15124Free

    Spool Holder for 19mm mdf

    Spool Holder for 19mm mdfthingiverse.com
    Remix to hang on 19mm wall.
    Category: none
    Tags
    930Free

    Prusa i3 Plus Spool Holder v2.0

    Prusa i3 Plus Spool Holder v2.0thingiverse.com
    Based on the original spool holders from Prusa. Changed it so they clip tight under the top of the frame. Press them down from the top and push the bo
    Category: none
    Tags
    8259Free

    Rostock max v2 dual spool holder

    Rostock max v2 dual spool holderthingiverse.com
    This is the dual spool holder setup for Rostock Max v2. It works brilliant, and spins great with the 608zz bearings on a M8 threaded rod. Instructions
    Category: none
    Tags
    11162Free

    Simple and easy filament spool holder

    Simple and easy filament spool holderthingiverse.com
    I wanted to have more room in my 3D-Printer cabinet, so i made a simple and easy size-adjustable Spool holder for my Filament. You can mount it in any
    Category: none
    Tags
    1051Free

    Prusa i3 Top dual spool mount

    Prusa i3 Top dual spool mountthingiverse.com
    This is a Spool mount to sit above the Prusa i3 printer. It can hold 2 spools. All that is required are 2 printed mounts, 4 small screws to secure it
    Category: none
    Tags
    960Free

    Universal Filament Spool Rollers - using 1" PVC & printed ends for 8mm rod

    Universal Filament Spool Rollers -  using 1" PVC & printed ends for 8mm rodthingiverse.com
    I wanted a universal spool roller for my new custom printer, with a new Diamind Hotend (3-color mixing hotend) I needed a 3 spool roller that would be
    Category: none
    Tags
    35200Free

    Spool mount for 6mm thick Prusa i3

    Spool mount for 6mm thick Prusa i3thingiverse.com
    Remixed from http://www.thingiverse.com/thing:670957 UPDATE 5/17/2015: Just realized I uploaded the wrong files originally. Sorry about that. Files
    Category: none
    Tags
    2466Free