Highly accurate 3D model of two city blocks in Downtown Seattle. This model is part of a ongoing project to model Downtown Seattle in the level of detail that you see in this model.https://www.cgtrader.com/modelmonkCheck out the renders here:www.3Dmodelmonk.com
My attempt at a Washington Huskies logo.Uploaded a 1.2 and a 2.4mm thick one, layer thickness 0.2, 6 or 12 layers,100x100mm (4x4 inches)Requests are welcome!Washington Huskies logo  by Bjornnijen  is licensed under the Creative Commons - Attribution - Share Alike  license. http://www.thingiverse.com/thing:713943 http://www.thingiverse.com/Bjornnijen http://creativecommons.org/licenses/by-sa/3.0/
This model of the iconic Seattle Space Needle stands 40 cm tall.Seattle Space Needle  by Intentional3D  is licensed under the Creative Commons - Attribution - Share Alike  license. http://www.thingiverse.com/thing:567695 http://www.thingiverse.com/Intentional3D http://creativecommons.org/licenses/by-sa/3.0/
Print each item separately in a unique material, or print several in the same material. glue or heat weld the prints together, unless they snap-fit well. 0.20-0.30mm clearance between mating objects. 0.05mm clearance between fish and fish interior parts, for ease of dual-extrusion printing. If you intend to print the fish and the fish interior separately, be aware there is very little clearance.There is a cutout in the backside to affix a circular magnet inside, to allow for magnet engagement/disengagement of the tag. Diameter is around 11mm, (or near 0.433")Tab is 36x88mm, with an overall assembled height (or thickness) of 3.4mm.All features lay within 0.20mm layers, so 0.04mm, 0.05mm, 0.10mm, or 0.20mm layer heights will look best.