This ordinary looking grey box opens up to reveal a cool, colorful star! Printed in place by on a CraftBot Plus with Palette. The 'star' is a stellated rhombic dodecahedron. Thanks to mathgrrl for the original model! Check it out in action http://i.imgur.com/uNTbCeY.gifv ! http://i.imgur.com/uNTbCeY.gifv
The Fuser Block enables you to securely fuse two ends of 3D printing filament together in about 10 seconds. With this tool you can recycle leftover filament at the end of the spool, extend the length of your filament spools, and add color changes to your prints!The printed parts enable you to safely hold the heated block under a hinged guard, and clamp everything to the side of a table. It works on 2.85mm and 1.75mm filament in any printing material. The Fuser Block is controlled by plugging the 3 two-pinned connectors into your existing 3D printer controller. These 3D printing models are shared with you here on Pinshape.com for FREE, but to complete the assembly you'll need the associated hardware kit available from the EngineerDog Parts eBay store here . Complete assembly and use instructions will be available on 3DPrinting.com  in the coming days. See image attached for recommended print settings.  http://www.ebay.com/itm/182175757778?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 http://3dprinting.com/
This spool holder is designed like a modular rack, you can to put many spools as you want in vertical form.And for easy changing spool you only need to pull up the roll and change for another one.This model have two options to being used:You can put the modular rack on a table or in the floor.If prefer, you can use the wall mount (incorporated in the design) to put the rack in the wall to a few meter up from the floor.For my next version i want make and integrateA filament guide (1.75mm and 3mm)*A system for stopping retraction.This model is flexible in his design, you can make some accessories and change the configuration for aumentar its productivity.Enjoy!!!!