Mount 3D model for printing: 2387 results found

Displaying 1 - 32 of 2387
  • Free
  • Reversable Hold-Down for T-Slot Tables

    Reversable Hold-Down for T-Slot Tablescults3d.com
    This is a reversable hold-down clamp used on work surfaces with t-slots. Use with thin work pieces one way, or flip around to fit thicker stock. This is based on a collection of different clamps I've seen while browsing woodworking tool retailers.
    Category: none
    Tags

    Thing-O-Matic Filament Spool Bracket

    Thing-O-Matic Filament Spool Bracketcults3d.com
    Yet another spool holder! No need for a filament guide!!! Can be used on top of Bot or benchtop.
    Category: none
    Tags
    150Free

    upgrated extruder mountt

    upgrated extruder mountt 123dapp.com
    upgrated extruder mount with easy belt installation
    Category: none
    Tags
    1142Free

    Power Brick Mount

    Power Brick Mount123dapp.com
    Mount for Yiynova's Power Brick. For PSUs that at 32x59mm
    Category: none
    Tags
    123Free

    Space camera holder/clip

    Space camera holder/clippinshape.com
    I will present you... Camera holder/clip for Astronauts & Space travellers... (standard camera 1/4 screw)NOW astronauts can make more beautiful pictures/videos in the space... :-) this gadget makes astronauts hands free so they can work easier...*Important: use only in space & zero gravity (low orbit)*/(very easy to print no support or raft required) /Enjoy and Happy printing...
    Category: none
    Tags
    163Free

    Topeak QuickClick Saddle Rail Mount

    Topeak QuickClick Saddle Rail Mountthingiverse.com
    Relatively permanent mount on the rear saddle rails for Topeak QuickClick compatible saddle bags. I made two versions: one flat (original design), &am
    Category: none
    Tags
    938Free

    Table/Sill cable mount

    Table/Sill cable mountthingiverse.com
    This is the first design I've made for 3D printing, but the concept came to me far before I got this Monoprice Select Mini I've used. It&#03
    Category: none
    Tags
    1023Free

    Prusa i3 X Carriage holder part

    Prusa i3 X Carriage holder partthingiverse.com
    Stepper motor holder for Prusa i3 For Prusa i3
    Category: none
    Tags
    939Free
    http://www.thingiverse.com/thi... [1][1] http://www.thingiverse.com/thing:2123857
    Category: none
    Tags
    1416Free

    Garmin sandbag GPS mount to GoPro mount conversion

    Garmin sandbag GPS mount to GoPro mount conversionpinshape.com
    So I had one of these Garmin dash sand bag mounts for a 12 year old GPS that I never use and I decided to convert it to a GoPro mount.The Garmin units have a non skip rubber on the back and 4 pouches with some kind of weighted material that makes the mount excellent for non permanent mounts. Here in California it's illegal to mount anything directly to the windshield like the suction cup mounts.
    Category: none
    Tags
    100Free

    Sleep Number Remote Holder

    Sleep Number Remote Holdercults3d.com
    This print will hold the Sleep Number Bed Remote so that you can mount it on the wall, night stand, or even head board
    Category: none
    Tags

    Boneheads: Support de démonstration - PROMO - via 3DKitbash.com

    Boneheads: Support de démonstration - PROMO - via 3DKitbash.comcults3d.com
    Un morceau parfait de conversation pour la plupart une partie non-lame, et une décoration sportive pour toute porche Halloween. Si vous êtes à la recherche pour encore plus de fun crâne, avoir un regard sur 3DKitbash.com depuis plus de 20 Boneheads éléments supplémentaires! Nous nous efforçons de fournir la meilleure expérience d'impression 3D possible. Merci beaucoup pour l'impression et appuyer nos efforts! ~ Quincy de 3DKitbash
    Category: none
    Tags
    160Free

    iPhone 6, 6S and 6+ support de mur

    iPhone 6, 6S and 6+ support de murcults3d.com
    Instructions d'installation:Utilisez le taquet mural comme gabarit pour marquer un trou sur le mur pour un ancrage de plaques de plâtre. Percer le trou, placez l'ancre et fixer le taquet de mur avec une vis de cloison sèche. Glissez iPhone dock sur cale.
    Category: none
    Tags

    Fan Mount for MKS BASE V1 3d printer board

    Fan Mount for MKS BASE V1 3d printer boardcults3d.com
    use some m3 nuts and screws, length depends on the length of your fans. Alternatively you can use zip ties.I prefer to mount the fans under the part2, but you can also put the fans on top of the part2.
    Category: none
    Tags

    Un crochet de mur minimal

    Un crochet de mur minimalcults3d.com
    Consultez www.youtube.com/MakeAnythingChannel [1] pour plus de vidéos de projets![1] http://www.youtube.com/MakeAnythingChannel
    Category: none
    Tags

    RigidBot Teléfono y soporte para tableta (universal)

    RigidBot Teléfono y soporte para tableta (universal)cults3d.com
    Probado con teléfonosiphone 5Samsung Galaxy Note 4 (ver foto)Samsung Galaxy S5Samsung Galaxy S4ZTE Blade IIIProbado con tabletasSamsung Galaxy Tab Pro 10.1 (ver foto)Asus Eee Pad TF101 (pesa 680 g!)Actualización - Versión 1.1Puede utilizar dispositivos más gruesos (v1.0 = 10mm, v1.1 = 12mm) y tiene ranuras más grandes. La ranura central se puede utilizar para dispositivos con lentes muy cerca del borde inferior, como las tabletas invertidas. También se agregan refuerzos de modo que las ranuras más grandes no hagan para una construcción más débil.
    Category: none
    Tags

    Ramps 1.4 Fan Mount - 1 hour print

    Ramps 1.4 Fan Mount - 1 hour printcults3d.com
    This is a very minimum but practical 60mm fan mount for Ramps 1.4 printable in 1 hour. actually I printed it in 59min using my Prusa i3.
    Category: none
    Tags
    110Free

    Soporte de ventilador doble E3D V6 MK8

    Soporte de ventilador doble E3D V6 MK8cults3d.com
    Una boquilla rediseñada para forzar el aire hacia abajo, lejos del bloque del calentadorUn área de fondo plano más grande para una impresión más fácil, un volumen de aire ligeramente más grandeCorregido pequeño problema de alineación en los orificios de montaje del ventilador
    Category: none
    Tags
    140Free

    GoPro SkiPole Mount

    GoPro SkiPole Mountcults3d.com
    I had chance to have another look at these and revised them a little bit more.I Have added my own temp. supports(you may need to re orientate it on the bed, those circular discs are the temp supports and should be on the bottom, ie on the print bed, they break off easily once the print is complete).I stripped some out some lengths and thicknesses, to save on print time and material etc,modified the circular grip / slot to a three point flat grip,(should allow it to be used with a bigger variety of ski pole sizes),made the ziptie holes thinner, added some radius to allow the zipties to grip better,
    Category: none
    Tags

    Support de multimètre (mur ou mural)

    Support de multimètre (mur ou mural)cults3d.com
    Mise à jour 2016-04-17Variante B ajoutée avec un enrouleur de câble plus grand et un compartiment de sonde.
    Category: none
    Tags
    110Free

    Grapa de pared Bar

    Grapa de pared Barcults3d.com
    Puede montar la barra de pared taco verticalmente u horizontalmente.
    Category: none
    Tags
    120Free

    GoPro Welding Camera Mount

    GoPro Welding Camera Mountcults3d.com
    Width11.5 cmHeight5.8 cmDepth8.6 cm
    Category: none
    Tags

    Yi 4K Action Camera Welding Camera Mount

    Yi 4K Action Camera Welding Camera Mountcults3d.com
    Width11.5 cmHeight5.8 cmDepth8.6 cm
    Category: none
    Tags

    Adjustable Tripod (spring loaded)

    Adjustable Tripod (spring loaded)cults3d.com
    I use #8 screws that are a 1/2 inch long. I also used 3 1/4" x 7/8" extension springs. The springs just clip on to the legs to hold the wedge in place and the screws and bolts hold the leg to the base.
    Category: none
    Tags
    100Free

    Antena WiFi VESA / Montaje en Pared

    Antena WiFi VESA / Montaje en Paredcults3d.com
    Compré mis bases de antena como se ve en la foto en eBay por unos 2,5 € cada uno, incluyendo un cable de extensión de 3 metros. Se encajan a presión en el soporte, que a su vez se unió a un brazo de monitor VESA utilizando tornillos M5.
    Category: none
    Tags
    140Free

    WiFi Antenna VESA/Wall Mount

    WiFi Antenna VESA/Wall Mountcults3d.com
    I bought my antenna bases as seen in the photo on eBay for about 2.5€ each, including a 3 meter extension cable. They snap right in the mount, which in turn was attached to a VESA monitor arm using M5 screws.
    Category: none
    Tags
    140Free

    GOPRO SKIPOLE MOUNT - TO SUIT A POLE CIRCA 14MM DIA

    GOPRO SKIPOLE MOUNT - TO SUIT A POLE CIRCA 14MM DIAcults3d.com
    I had chance to have another look at these and revised them a little bit more.I Have added my own temp. supports(you may need to re orientate it on the bed, those circular discs are the temp supports and should be on the bottom, ie on the print bed, they break off easily once the print is complete).I stripped some out some lengths and thicknesses, to save on print time and material etc,modified the circular grip / slot to a three point flat grip,(should allow it to be used with a bigger variety of ski pole sizes),made the ziptie holes thinner, added some radius to allow the zipties to grip better.
    Category: none
    Tags
    100Free

    Bepo - Universal Phone Quad-Pod

    Bepo - Universal Phone Quad-Podcults3d.com
    Printed using green H&H 3D Plastics FilamentLink to website: http://goo.gl/MhPyri [1][1] http://goo.gl/MhPyri
    Category: none
    Tags

    iPhone 6 y 6 + montaje en la pared 6S

    iPhone 6 y 6 + montaje en la pared 6Scults3d.com
    Instrucciones de instalación:Utilice el sistema de fijación de pared como plantilla para marcar un agujero en la pared para un anclaje de paneles de yeso. Taladrar el agujero, colocar el anclaje y apretar el taco de pared con un tornillo drywall. Deslice el muelle del iPhone en cornamusa.
    Category: none
    Tags
    100Free

    RigidBot Téléphone & Tablet Mount (Universal)

    RigidBot Téléphone & Tablet Mount (Universal)cults3d.com
    Testé avec des téléphonesiPhone 5Samsung Galaxy Note 4 (voir photo)Samsung Galaxy S5Samsung Galaxy S4ZTE Blade IIITesté avec des comprimésSamsung Galaxy Tab Pro 10.1 (voir photo)Asus Eee Pad TF101 (pèse 680g!)Mise à jour - Version 1.1Peut utiliser des dispositifs plus épais (v1.0 = 10mm, v1.1 = 12mm) et a des fentes plus grandes. La fente centrale peut être utilisée pour les appareils dotés d'une lentille très proche du bord inférieur, tels que les tablettes inversées. Aussi a ajouté des renforts de sorte que les fentes plus grandes ne font pas pour une construction plus faible.
    Category: none
    Tags
    100Free

    Soporte de multímetro (pegboard o pared)

    Soporte de multímetro (pegboard o pared)cults3d.com
    Actualización 2016-04-17La versión B alterna se agrega con un devanador de cable más alto y un compartimento de sonda.
    Category: none
    Tags

    Boneheads: Crâne de loup et mâchoire - PROMO - 3DKITBASH.COM

    Boneheads: Crâne de loup et mâchoire - PROMO - 3DKITBASH.COMcults3d.com
    200Free