This is a chalk holder for up to 10 chalks based on the hand of a Lego Minifigure. When you print it in the original size it can hold chalks with a diameter of 10mm. If your chalks had a diameter of e.g. 12mm scale it proportional to the original thing with 1.2 (or e.g. with 0.8 if your chalks had a diameter of 8 mm).
This is a Lego Minifigure in original size. The different parts are not mobile if you print it as one thing. If you want to be able to move them, print every single part (maybe you have to sand them a bit before they fit into each other) and connect them together.
Permet de ranger jusque 16 minifigures (4 par marche). Posibilité de relier plusieurs présentoirs entre eux à l'aide de briques LEGO standards. Fixation murale possible (vis non fournies).Poosibilité de fixer sur la face avant du présentoir une plaque de présentation grâce à un emplacement compatible LEGO (2x4 plots).
Known as the "BABY GLOCK," the GLOCK 26 in 9x19mm has been the most sought-after concealed carry option since its release in 1994-a market once dominated by the 5-round snubnose revolver. The magazine capacity of 10 rounds is standard, and the highly accurate firing characteristics explain why the G26 is the mainstay backup option among security personnel and agencies worldwide.
The G43 is our new single stack, 9mm pistol. The G43 is the most highly desired and anticipated release in GLOCKs history. The G43 is the answer to your everyday concealed carry needs. It's ultra-concealable, accurate and fantastic for all shooters regardless of hand size. The grip has a built in beaver tail design which allows the shooter to acquire a high and tight grip. The aggressive texture of the grip lets the shooter more easily operate the pistol. The large magazine catch allows for easy removal of the six round magazine. Engineered to the same standards, the G43 can withstand the same tortures as other GLOCK pistols.
The GLOCK 19 Gen4, in 9x19, introduces revolutionary design changes to the pistol that has found worldwide acclaim with security services both private and public. The Modular Back Strap design lets you instantly customize its grip to adapt to an individual shooter's hand size. The surface of the frame employs the new scientifically designed, real-world-tested, Gen4 rough textured technology. Internally, the new GLOCK dual recoil spring assembly substantially increases the life of the system. A reversible enlarged magazine catch, changeable in seconds, accommodates left or right-handed operators. The G19 Gen4 9x19mm retains the GLOCK accessory rail for your attachments. Also available in MOS configuration.
Here's the Trailerhttps://www.youtube.com/watch?v=-9-16sbEcPE This idea came to me in a moment of Dad inspiration. Ilove to let my girls ride their bikes, but then i also don't want them goingtoo far just in case. TheiBrake system allows the girls to have the freedom but me the piece of mindknowing that i can stop their bikes remotely from up to 100 metres away!Thesystem comprises 2 main parts, the iBrake (servo and actuator) and the iBrick(the home of the batteries, Blynk Board and brick compatible lid)Why not take your favourite minifigures with you wherever you go? Remember Lego is for life, not just for christmas!Usingthe Blynk Board and Blynk custom iOS app, i am able to turn on the brake on andalso able to turn on the 12 LED lights that surround the iBrick. I used super-bright white LED's to be safe and seen! The lights flash when the brake has been applied to give you a visual cue that the brake as been deployedHere's the tutorial linkhttps://www.hackster.io/davecl... Iprinted the housings at 0.2mm 20% infill, the Rack and Pinion were printed outat 80% infill with 3 perimeters for extra strength.The Rack should be printed out as orientated to give it the strength to not shred the teeth. Once printed the 2 rack parts should be superglued togetherThisbad boy actually works, costs about £40 in parts, and could save your childfrom getting into any unnecessary scrapesHere's it in actionhttps://youtu.be/VBcswoXpTGo  SWEET...  https://www.youtube.com/watch?v=-9-16sbEcPE https://www.hackster.io/daveclarke/ibrake-remote-braking-system-for-kids-bikes-2a0bbe https://youtu.be/VBcswoXpTGo
This is the endoskeleton for a line of mini action figures. Custom armor snaps onto this frame to create different characters. This figure stands about 2” tall and is available throughhref="http://www.shapeways.com/model/968595">shapeways