M3d 3D model for printing: 46 results found

Displaying 1 - 10 of 46
AT&T Mifi Liberate Holder
======== SUMMARY =============================================================I needed a holder for our the Mifis at work. I printed them so that I can add more if need it. They slide together easily.======== PRINT SETTINGS ======================================================*Printer: * M3D*Rafts: * No*Supports: * Yes*Infill: * 10%*Notes: *...
Category: none
Tags: holderm3d
58 downloads1 views
Abstract Necklace
Dimensions: height:10,4cm width:3,1 depth:2,0mm
Category: none
286 downloads2 views
Soldier Egg Cup
Basics Dimensions: Part1: height:4,3cm width:7,0cm / Part2: height:3,9cm width:5,8cm
Category: none
287 downloads3 views
M3D Micro Filament Spool Holder
======== SUMMARY =============================================================So... After M3D's model almost literally broke my printer, I have redesigned it.The file named _try2 will probably print a little better. I did a little filing on the first try piece - which is 1mm larger in diameter (39mm for the old one, 38mm for the new Try2 one...
Category: none
313 downloads2 views
M3D SlimCD Door Hinge
======== SUMMARY =============================================================*M3D SlimCD Door Hinge*This is a hinge for a *slim CD jewel case* that will attach to the M3D printer.*Print Settings:* This was printed medium quality, medium fill, wave bond, raft, supports, and on model supports, rotated 45 degrees, and shifted slightly to fit on the...
Category: none
279 downloads1 views
Dowel Lock Bracket
======== SUMMARY =============================================================This is a custom dowel lock bracket that I designed and created.I made this for a custom phone extension pole / tripod, but it could be used for countless other things. It is designed as one universal part so you don't have a left or right half. Just print two or...
Category: none
140 downloads0 views
M3D Custom Lego Block
======== SUMMARY =============================================================Customized version of http://www.thingiverse.com/thing:340321 [1]Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=340321 [2]======== INSTRUCTIONS ========================================================Using the following options:...
Category: none
87 downloads1 views
M3d Hold Down Brackets
======== SUMMARY =============================================================These Hold Down Bracket keep your M3d Printer from shifting around. Print the side Brace in the same orientation that it will be used======== PRINT SETTINGS ======================================================*Printer: * M3d*Rafts: * No*Supports: * Yes*Resolution: *...
Category: none
49 downloads2 views
Micro M3D External Spool Holder
======== SUMMARY =============================================================Filament holder designed to work on a Micro M3D. Can be used on other printers i just don't know how well. Can be mounted one of two ways as shown from the pictures.
160 downloads4 views
M3D Filament Guide
======== SUMMARY =============================================================This is my own design. Its a Filament Guide for the M3D Micro Printer that clips nicely above the extruder. I use this personally in conjunction with the External Filament Spool holder posted here: http://www.thingiverse.com/thing:761893 [1]Your angle my vary slightly...
Category: none
62 downloads1 views