*Knot Lamp*Hollowed out with a thickness of 1.5mm.3D Print it with White Nylon using SLS 3d printer or on your home 3d printer with translucent PLA/ABS.Insert a flexible LED strip from the opening at the bottom thru the Knot's loop for a full-contour illumination.
Continuation of previous collection RIBONE. This time it is a play with crossing the elements but with one difference: every second rib is slowly disappearing to have appearance little bit lighter then version ONE.
Based on a Tetrahedral Mesh generation algorithm.Unique looking lampshade that can be 3d printed on a home 3d printer with translucent white ABS/PLA/NylonSize: 150x150x180mmWall thickness: 2mmOn the bottom there is a 50mm opening for a light/LED fixture.
Fractals create some of the most amazing looking shapes.This one i made as a Lampshade with a 2mm wall thickness and a 30mm hole at the base for a LED or 40w bulb fixture.Size: 150x156x180mm3D print it with translucent/opaque filaments on your home 3d printer or with white Nylon on SLA printers.
Fractals creating a complex symmetric geometry that baffles the eye.Size: 105x200x200mmMaterial Volume: 100 cubic cm.3D print it with white Nylon on a SLS 3D printer using a 3d printing service bureau.Insert a LED fixture from any position you see git till the center.
Beautifully designed Fractal Sphere.Note: those rectangular holes: The first 1/4 of the sphere allows lamp light to reflect in a straight line, the rest of the rectangles points upwards and mask the light.*Size:* 150x150x150mm*Thickness:* 1.6~1.9mmThe base has a cut-hole of 29mm and surrounding ring of 6.5mm (widen the hole with any 3D Software to fit your light fixture)3D Print it with white Nylon OR natural PLA on your personal 3D Printer.
A 3D “snapshot” of a Gyroid at a specific angle designed as a flat Wall Lampshade.There is a 30mm cut-hole at the back to insert a Cree LED or a 40w Bulb fixture.You can resize it to your specifications.Thickness: 2~3mm (outer frame is 3mm)
Unique Flame shaped lamp shade derived from icosahedron Math geometry.There is a 25mm circular opening at the base for a LED or 40w bulb.Size: 145x145x167mm3D Print it with White-Translucent PLA/ABS.You can use self dimming Led to emulate a flame light.
CylindriHex is a 50cm tall Cylindrical Lampshade for Delta 3d printers.The surface is made out of large & tiny hexagons to mask the light in a unique way.*Size:* 180x180x495mm*Thickness:* 1.5~3mmThe base has a 30mm ring for a LED or bulb fixture.
2 Designs in one zip file.Unique Fractal wall lampshades designed for 3d printing with a home 3d printer with PLA/ABS filaments.Radius: 150mmHeight: 80mmThere is an opening at the center of the designs for a LED fixture.
Fractal based Table/Wall Lampshade.Size: 150x150x90mmWall Thickness: Exactly 1.5mm (hollowed out)Volume: 79 cubic cm.A 25mm (1″) circular entrance at the base for a LED fixture.3D Print it in Natural or translucent PLA/ABS
Designed for Delta 3D Printers.Scale it up to your maximum Z height – up to *x2* for a 50CM height.Once you've scaled it up use your 3D software to cut a hole in the base for your light fixture – a 40w lamp or a bright 3W LED
*Aztec Sun Lampshade – by Dizingof*Designed with Fractals.*Size:* 150x150x150mm*Thickness:* exactly 1.5mm*Volume:* 304 cubic cmAt the bottom there is a cut hole for a LED or 40w bulb fixture.This design is for 3D printing with a SLS Nylon 3D printer. (aka White Strong & Flexible Nylon powder)
*Reaction Sphere Light Shade*Based on a Reaction-Diffusion simulation.*Size:* 150x150x144mm*Thickness:* 1.5mm*Volume:* 145 cubic cm.A 30mm opening at the base is for a LED/bulb.3D Print it in White Nylon (SLS) or use transparent ABS/PLA for your home 3d printer.