I3rework 3D model for printing: 33 results found

Displaying 1 - 32 of 33
  • Free
  • E3D Proximity sensor mount for Prusa I3 Rework

    E3D Proximity sensor mount for Prusa I3 Reworkthingiverse.com
    Proximity sensor mount for Prusa I3 rework with E3D hotend. I found one, but it was for smaller hotend, so i made one myself. The sensor is LJC18A3
    Category: none
    Tags
    39474Free

    Prusa I3 Rework X-END-IDLER with Solidworks 2014 Source

    Prusa I3 Rework X-END-IDLER with Solidworks 2014 Sourcethingiverse.com
    11/09/2014 - I found an error in the hole for the screw that holds the 624zz bearing as it was too small (strange as the original I have was the wrong
    Category: none
    Tags
    18593Free

    Prusa I3 Rework X-Idler Drop In Replacement Tensioner upgrade V2 with Solidworks 2014 Source

    Prusa I3 Rework X-Idler Drop In Replacement Tensioner upgrade V2 with Solidworks 2014 Sourcethingiverse.com
    Decided to redo some of my printer and made this. It has a slightly more stable linear bearing placement as well as the M5 nut placement. The M5 nut
    Category: none
    Tags
    23556Free

    Prusa I3 Rework X-Motor Drop In Replacement upgrade with Solidworks 2014 Source

    Prusa I3 Rework X-Motor Drop In Replacement upgrade with Solidworks 2014 Sourcethingiverse.com
    Prusa I3 Rework X-Motor Drop In Replacement upgrade with Solidworks 2014 Source
    Category: none
    Tags
    23417Free

    E3D V6 Bowden X Carriage With Filament Tube Support Guide Mount Reinforced

    E3D V6 Bowden X Carriage With Filament Tube Support Guide Mount Reinforcedthingiverse.com
    E3D V6 Bowden X Carriage With Filament Tube Support Guide Mount Reinforced Infill 50 - 100 % Layer Height 0.18mm Pla or Abs Redesigned in 123D Design
    Category: none
    Tags
    30236Free

    Migbot Prusa i3 X tensioner with PLA-Bearing

    Migbot Prusa i3 X tensioner with PLA-Bearingthingiverse.com
    Migbot Prusa i3 X tensioner with PLA-Bearing still under testing Please Post pictures and comment.
    Category: none
    Tags
    25560Free

    Prusa I3 Rework X-Idler Drop In Replacement Tensioner upgrade with Solidworks 2014 Source

    Prusa I3 Rework X-Idler Drop In Replacement Tensioner upgrade with Solidworks 2014 Sourcethingiverse.com
    V2 of this exists at http://www.thingiverse.com/thing:699285 . Well, the original parts someone nicely made for me finally had one break and it was th
    Category: none
    Tags
    20566Free
    The Prusa i3 Rework evolve in revision 1.5 !! eMotion Tech realized several improvements: A new extruder with the following features : -- 1.75 m
    Category: none
    Tags
    227.5KFree

    E3D v6 Compact Extruder for i3 Rework

    E3D v6 Compact Extruder for i3 Reworkthingiverse.com
    Prusa i3 Rework E3D v6 Compact Extruder for 1.75mm and 3mm filaments. Designs based on the Wade Extruder but much smaller. Remixed of the i3 Rework
    Category: none
    Tags
    195.5KFree

    modular hotend bowden mount incl. fan duct and light

    modular hotend bowden mount incl. fan duct and lightthingiverse.com
    My design of a modular hotend bowden mount. The Hotend is very easy removable. It is enough space left for an auto-bed-leveling sensor or any upgr
    Category: none
    Tags
    287.7KFree

    Prusa i3 Y-axis tensioner (M10/Rework)

    Prusa i3 Y-axis tensioner (M10/Rework)thingiverse.com
    I was looking for a tensioner that could be swapped out without the need for removing the rods from the frame, as well as keeping the bearing centered
    Category: 3D PRINTING / Prusa
    Tags
    17305Free

    40mm cooling fan duct for Prusa i3 Rework with J-Head

    40mm cooling fan duct for Prusa i3 Rework with J-Headthingiverse.com
    40mm cooling fan duct for Prusa i3 Rework with J-Head
    Category: none
    Tags
    16191Free

    Migbot Prusa Duct Fan - One piece Mod

    Migbot Prusa Duct Fan - One piece Modthingiverse.com
    Migbot Prusa Duct Fan - One piece Mod
    Category: none
    Tags
    11291Free

    i3 X-Carriage for GT2 & T2.5 with added 30mm holes

    i3 X-Carriage for GT2 & T2.5 with added 30mm holesthingiverse.com
    Added 30mm spacing to this carriage http://www.thingiverse.com/thing:643799 remixed from this carriage http://www.thingiverse.com/thing:586636
    Category: none
    Tags
    17914Free

    i3 Rework 3 LM8UU Bearing X-Carriage

    i3 Rework 3 LM8UU Bearing X-Carriagethingiverse.com
    It works with both T2.5 and GT2 belts. Suggested by KriLL3
    Category: none
    Tags
    15794Free

    Filament Guide for Tower Center - Prusa i3 8mm Acrylic

    Filament Guide for Tower Center - Prusa i3 8mm Acrylicthingiverse.com
    Made a filament guide in SketchUp for the top center of my GEEETech Prusa i3 Acrylic - this guide slips over the acrylic plate (8mm) and fits the fact
    Category: none
    Tags
    16198Free

    Prusa i3 2015 y frame zip tie corners

    Prusa i3 2015 y frame zip tie cornersthingiverse.com
    These y frame corners let you hold the smooth rods in place with cable ties. This improves handling and prevents unwanted dismounting of the y axis wh
    Category: 3D PRINTING / Prusa
    Tags
    18381Free

    i3 Rework X-Carriage for GT2 & T2.5

    i3 Rework X-Carriage for GT2 & T2.5thingiverse.com
    Remixed of the i3 Rework X-Carriage. The idea behind this design is make attaching your belt much easier and without using zip ties. belt-tightening
    Category: none
    Tags
    111.8KFree

    J-Head Fan Duct for Wade L3K Extruder (Prusa i3 rework)

    J-Head Fan Duct for Wade L3K Extruder (Prusa i3 rework)thingiverse.com
    This is a 40mm fan duct compatible with almost all hotends. It is designed to fit on this thing : http://www.thingiverse.com/thing:512338 I give a
    Category: none
    Tags
    331.4KFree

    I3 rework extruder E3d v5 1.75mm autobed leveling version

    I3 rework extruder E3d v5 1.75mm autobed leveling versionthingiverse.com
    http://a360.co/1Ne0zuU link to the fusion 360 version , editable ! started a inductive support ! 1.75mm filament, micro servo 9g version 1.75mm de
    Category: none
    Tags
    6384Free

    Box for Ramps 1.4 + Arduino mega v2.0

    Box for Ramps 1.4 + Arduino mega v2.0thingiverse.com
    This box was designed to fit for Arduino mega + Ramps 1.4. It is complete with its cap with fan mounting holes (40*40 fans) and with the mounting supp
    Category: ELECTRONICS / Arduino
    Tags
    221.2KFree

    I3 Rework single frame parametric Z axis stabalizer with Solidworks 2014 source

    I3 Rework single frame parametric Z axis stabalizer with Solidworks 2014 sourcethingiverse.com
    I3 Rework single frame parametric Z axis stabalizer with Solidworks 2014 source
    Category: none
    Tags
    5758Free

    Table clamp for I3 Rework with Solidworks 2014 source.

    Table clamp for I3 Rework with Solidworks 2014 source.thingiverse.com
    This is what I created to hold my I3 Rework to my 3/4 inch board. Your printer must be screwed into something (table or separate board) to use my oth
    Category: none
    Tags
    3453Free

    Prusa I3 Rework Y Plate Bearing Support Braces For LM8UU with Solidworks 2014 source

    Prusa I3 Rework Y Plate Bearing Support Braces For LM8UU with Solidworks 2014 sourcethingiverse.com
    This is a drop in replacement of the original. . . On this remix I kept the design of the original but had to fix a few mistakes in the dimensions to
    Category: 3D PRINTING / Prusa
    Tags
    101KFree

    X axis opto end-stop support, prusa i3

    X axis opto end-stop support, prusa i3thingiverse.com
    This object is the support for the X axis opto enstop, designed to be fixed on the X axis rods as shown in the picture here attached. On the top there
    Category: none
    Tags
    11206Free

    Prusa I3 Rework, or Wilson, Direct drive extruder with Solidworks 2014 source

    Prusa I3 Rework, or Wilson, Direct drive extruder with Solidworks 2014 sourcethingiverse.com
    Print all three parts as no part is interchangable with the original due to the alterations I made, . 11/26/2014 - Added a fixed version of the bearin
    Category: 3D PRINTING / Prusa
    Tags
    101.5KFree

    LM8UU bushing for standard Prusa i3 y carriage with

    LM8UU bushing for standard Prusa i3 y carriage withthingiverse.com
    LM8UU bushing for standard Prusa i3 y carriage with
    Category: 3D PRINTING / Prusa
    Tags
    111.4KFree

    Prusa I3 Rework Drop In Replacement/Upgrade Herringbone Gear Set with Solidworks 2014 source

    Prusa I3 Rework Drop In Replacement/Upgrade Herringbone Gear Set with Solidworks 2014 sourcethingiverse.com
    These are drop in replacement Herringbone gears with the same tooth ratio (43:10) as the original spur gear set so you will not need to adjust your e-
    Category: none
    Tags
    51.5KFree

    Parametric Y Plate Bushings, IGUS Style, for Prusa I3, and variants with Solidworks 2014 source

    Parametric Y Plate Bushings, IGUS Style, for Prusa I3, and variants with Solidworks 2014 sourcethingiverse.com
    I decided I had enough of the lousy loud LM8UU bearings (bearings are already falling out of my Chinese made ones) so I put my LM8UU support brace and
    Category: 3D PRINTING / Prusa
    Tags
    15590Free

    glass corner hold down v1

    glass corner hold down v1thingiverse.com
    made these because my print head cooler kept knocking off my clips that held the glass bed down .. This thing was made with Tinkercad. Edit it online
    Category: none
    Tags
    1191Free

    Prusa I3 Rework Autobed leveling Version 2 - 9g Servo Mount, and arm, with Solidworks 2014 source

    Prusa I3 Rework Autobed leveling Version 2 - 9g Servo Mount, and arm, with Solidworks 2014 sourcethingiverse.com
    I decided to finally release this after I made sure everything was working and I can say it is working beautifully after over a month. My original de
    Category: none
    Tags
    7549Free

    i3 Rework E3D Extruder

    i3 Rework E3D Extruderthingiverse.com
    i3 Rework E3D Extruder
    Category: none
    Tags
    96.1KFree