The rounded shape keep your hats in the natural shape of your head. When using hooks it will deform your hat, stretching them out. Printing the holders don't take long, approximately 3 hours. I used 10% infill but you could get away with less. print the holders on the wall mounting face to get best results. when mounting use good quality double sided mounting tape. hats can vary in weight and might fall if not a big enough piece or if its poor quality. (WARNING!!) If you don't do properly there s a chance the holders could fall tearing paint and drywall. (ALTHOUGH!!) If done right you wont need to worry about that, and you wont have screw holes in your walls.
Phone mount made for Iphone 6 with otter box case, can be scaled to fit pretty much anything though. Has holes in bottom for Aux and Lightning ports. Scale higher in Z dimension if the gap in the clips are too small, currently at 3.5 mm. It must be printed with support because of the small teeth on the insides of the clips.
Support for cotton rolls to facilitate the relative isolation , especially in children .I recommend printing on low quality ( 0.3 mm ) And with 0.3 proportion (approximately 35x25x10 mm )_______________________________________________________________Suporte para rolos de algodão para facilitar o isolamento relativo, principalmente em crianças.Recomendo a impressão em qualidade baixa (0,3 mm)E com proporção 0.3 (aproximadamente 35x25x10 mm)
I Sculpted This Hands Smartphone's Holder , simulating hands Typing Your Phone, Tablets are also supported, Model It's Low Poly and can be printed without supports, Exclusive for Pinshape for FREE, just Give me a like and Pictures for Your Printed version.
Sea flora inspired stylish soap holder for your bathroom. The model was test printed and is available to download on MyMiniFactory . Check also this design in different materials on shapeways . https://www.myminifactory.com/object/seashell-soap-holder-11489 https://www.shapeways.com/product/8ZTFX7JQG/seashell-soap-holder?li=user-profile&optionId=57529248