This is a reversable hold-down clamp used on work surfaces with t-slots. Use with thin work pieces one way, or flip around to fit thicker stock. This is based on a collection of different clamps I've seen while browsing woodworking tool retailers.
A 3D printable stand for your 3D printer filament spool. A free-standing design and wide enough for most aftermarket filament spools like those sold at 3DPrinterNinja.com. You can download the CAD models from my site if you like.
Disclaimer:I printed my model in PLA and it does not get hot or melt when using a normal tea light.Please make your own judgement when deciding what tealight to use and what material to print with.I will not be responsible for any damage caused by using this model.
If printed at original size, the holes are made to fit #6 standard bolt and hexnut hardware. Have not tested it, but M4 parts should also fit. So far it seems to be very strong when printed with 100% fill.
Avertissement:J'ai imprimé mon modèle dans PLA et il ne devient pas chaud ou fondre en utilisant une lumière normale de thé.S'il vous plaît faire votre propre jugement quand décider ce que tealight à utiliser et quel matériau à imprimer avec.Je ne serai pas responsable des dommages causés par l'utilisation de ce modèle.
We had a problem using our MakerBot Mini spools on our Bee the first so we designed a very simple adapter that snaps on the original one to fix the spool into place. It works surprisingly well. It's a quick and effective hack to use all the MakerBot PLA filaments.