Print the case and roller. The case needs no supports and should have an infill of at least 40% for durability. The roller does need supports, since it has overhangs, but can be printed with a lower infill. I printed mine at 5% and it works great!Fold the tab at the end of the tape and insert it into the T-shaped notch in the roller. Be sure to use the high number end of the tape so that the zero end comes out of the dispenser. Also, be sure you have the numbers upside down, as in the picture, since this piece will be inverted in the coming steps.place the spool into the case, and thread the tape through the mouth near the corner of the case.Snap the case together!Crank the roller to gather the tape onto the spool!
Easy to print and no need for batteries. This design amplifies sound from a lot of devices.The speakers must be either below or on the back of the smartphone.Take a look at the YouTube Video!! Subscribe my Channel  for more Videos and upcomming projects!!! https://youtu.be/RRzs4lcvxiQ https://www.youtube.com/channel/UCK_hqhphFljx2yREPhRpayQ
This case holds 10 cigarettes, the most of any SMOKESNAP and stays shut with a mini bic lighter rather than a normal one, to remain slim. Lighter slides out and pops in; never be without your flame again.Please Visit:www.facebook.com/3DBROOKLYNInstagram: 3DBrooklyn
iphone 5s. Just awsome:D -also visit my personal account: sketchfab./BlenderGE -Emailemail@example.com-Blendswap-Blendswap.com/user/BlenderGE -Instagram- westgamecreations -twitter- not avaible now -facebook- not avaible now -webside- will come in future