Hermosa como regalo del día de San Valentín o como decoración romántica luz de velas Mesa de la cena, esta forma de corazón se levantó portacandelitas Vela le ayudará con que "el amor está en el aire" estado de ánimo.
A small 3D printed decorative plant to celebrate this special day.A heart box with a hinge that can be used as a pendant or keychain, all printed in one piece.Find more information below.http://diwo.bq.com/impresion-3d-para-san-valentin/  http://diwo.bq.com/impresion-3d-para-san-valentin/
*A dog in voronoi-style.*This big Labrador Retriever Dog you do not have to feed!There are two voronoi versions. *Photos: *PLA. 6 cm height. (Ca. 30% original size from Labrador_voronoi_2.stl). I recommend to print the dog larger than 30%. The wall is in this size only 1-2 layers thin./Based on: Labrador Retriever Dog by dogbrand (CC BY 3.0)/------------------------If you have no 3D-printer, you can buy a printed copy here: Medium size: www.shapeways.com/product/GY36...  Big size: www.shapeways.com/product/44M2... ------------------------ http://www.shapeways.com/product/GY363GCWJ/ http://www.shapeways.com/product/44M2PMABA/
*A burgeoning capsule Planter *(monochrome version) A beautiful flower pot permeated with a organic double wall voronoi outside shell. This wonderful art decor is also ideal as a gift and as decoration everywhere an eye-catcher! There are two version available. One with a small an one with a larger pot. *Color version:* monochrome/ (One-part object: The pot is fixedly attached to the outer voronoi-shell.)/*Pot version:* small and large *Original size: *11.7 x 8.7 x 11.3 cm /(can be scaled)/*Note: *Test before planting, if the pot/vase is waterproof. Depending on the material and printing, the pot may not be waterproof. In this case, the pot can inside coated with a suitable lacquer. Or simple glue a pvc-foil in.*Printing:* I have printed it with 5 layers and the pot was waterproof. I used 1-1,5 cm raft for a good stand during the printing process. Printed without support.*About the Photos: *Own 3D-print of the 2-color version* with Wood (outside) and brown PLA (pot). The wood outside was not cleaned, so that remains a rough natural look. You can print it more precise like the rendering images. /*** Here is the two-color (two parts) version available: https://pinshape.com/items/25606-3d-printed-a-burgeoning-capsule-planter-2-colorpart-version  /--------If you have no 3D-printer, you can buy a printed copy here:https://www.shapeways.com/shops/designgravity -------- https://pinshape.com/items/25606-3d-printed-a-burgeoning-capsule-planter-2-colorpart-version https://www.shapeways.com/shops/designgravity
The organic flower pot / Voronoi vase(monochrome version)A beautiful flower pot or vase permeated with organic voronoi.Color version: monochrome (V. 1.0)Images:The photos show the monochrome version (white) and a two-color version (white-green). Printed with PLA.The two-color version pot was printed with bad old white filament, but gave a great special effect. It is planted with carnivorous plants (Dionaea/Venusfliegenfalle and Sarracenia/Schlauchpflanze).*The two-color version is available here: *https://pinshape.com/items/252... ------------------------If you have no 3D-printer, you can buy a printed copy here: 2-Color Sandstone: https://www.shapeways.com/prod... Monochrome: https://www.shapeways.com/prod...  ------------------------ https://pinshape.com/items/25211-3d-printed-organic-flower-pot-voronoi-vase-2-color https://www.shapeways.com/product/HDV7CCFSD/ https://www.shapeways.com/product/7PN9HAR22/
*Voronoi Pearl Light **Lamp No. 1 *for LED-Spots or LED tealight candle*Small lamp > big impact! * This Voronoi *Pearl Light Lamp* is a beautiful decoration and lamp. Through the voronoi-parts, the light casts a beautiful light and shadow effect. The Voronoi Pearl Lamp looks so at day and night very nice and is therefore ideally suited as a gift and decoration. *Original size: *Ca. 10.4 x 10.4 x 6.8 cm The Lamp is composed of two parts (shells) which are set on each other. Simply inserting an LED tea light candle or a other LED-light in the inside of the bottom part. In the photos, we use as lighting for example the cheapest LED spot of IKEA ("LEDBERG" LED spot) and the light is impressive.*Important: *Please use only LED lights. Do not use real tea lights. *Printing: *Printed with black PLA. Without support. More lamps and candleholder etc. in different sizes and shapes can be found here:www.shapeways.com/shops/designgravity  https://www.shapeways.com/shops/designgravity?s=0&section=-+Candleholder+%26+Lamps
id : sc20051a8size : 247X161X130mmfiles : 7pieces : 8maximum size of the component : 250X80X10mmtotal print time : 10h49mraft : yessupport : noApplicable Bulb type : tBulb SInstructions :lamp backplane link : https://cults3d.com/en/home/your-art-nouveau-lamp-backplane lampshade infill 100% , Best resultsCan be used with lampshade http://www.toolmoon.com/g007.html  https://cults3d.com/en/home/your-art-nouveau-lamp-backplane http://www.toolmoon.com/g007.html
Make this 4th of July even more festive with OogiMe's USA-shaped cookie cutter.The BBQ is on fire, the guests are arriving, and all that’s left is to upgrade the dinner tables with OogiMe’s USA-shaped cookies with a click of a button – PRINT NOW!