Formlabs 3D model for printing: 34 results found

Displaying 1 - 32 of 34
  • Free
  • https://www.etsy.com/listing/399188541/antennae-lamp-3d-printed?ref=shop_home_feat_3 [1][1] https://www.etsy.com/listing/399188541/antennae-lamp-3d-printed?ref=shop_home_feat_3
    Category: none
    Tags
    110Free

    Screw Thread Test Part

    Screw Thread Test Partpinshape.com
    This test part was used in a blog post going over some of the methods for adding threads to printed parts. Check out the post here [1]![1] http://formlabs.com/blog/adding-screw-threads-3d-printed-parts/
    Category: none
    Tags
    Originally designed as an adjustable propeller. Once printed it became a fun toy to play with.  This Is specifically designed to be printed on ether a Polyjet or SLA printer. If printed on an FDM printer I recommend enlarging the parts.  This design requires two M3 bolts and a M3 Tap to make the threads. http://www.mcmaster.com/#91502... [1] http://www.mcmaster.com/#8305a... [2][1] http://www.mcmaster.com/#91502a110/=12p23t0[2] http://www.mcmaster.com/#8305a52/=12p254f
    Category: none
    Tags
    854Free

    DRONE - AfterByte MINI

    DRONE - AfterByte MINIpinshape.com
    This is a real working 1/4 scale BattleBot drone. The full sized model "AfterByte" can be seen on BattleBots:The Gears Awaken (2016).www.MBSrobotics.com [1]www.battlebots.com/robot/basilisk/ [2]This file was designed for the Form 2 and other Formlabs printers, see www.Formlabs.com [3] . We finished our first drone in a day with our Form 2,  the prints required no drilling or sanding to fit the motors, wires, zip ties etc.*Step 1**Prep and print the files*: We have designed our .stl's to work with many different motors simply by scaling the file.  If you plan to use our parts list, you will want the files scaled by 50%, final file sizes should be:Wing - 75.04x65.92x204.7mmFlight Body - 109.64x52.85x130.16mmFight Body - 109.64x125.97x117.32mm*Step 2**Order Parts*: Hobby King = friend :D4x Motor [4] = $35.604x ESC- motor controller [5] = $40.401x Lipo Battery Pack [6] = $9.992+x Carbon Fiber Propellers [7]  = $7.361x Naze32 Flight Controller [8]  = $19.99TOTAL: $113.34If this is your first drone, you will also need a Flight Remote [9] and Battery Charger [10].*Step 3**Body Assembly + Motor wiring*:  You will need a bit of epoxy to hold the body and wings together. The channel in the arms is easily big enough to handle the wires from the motors, but not much else. For our installation we cut the banana plugs off the motor leads and soldered all three wires to a guide wire (1m).  We then ran this guide through the motor cradle hole. By gently pulling the guide, the motor wires will follow with little resistance. *Step 4**ESC + Logic Wiring*:  If your building the Flight Body, get that flight controller in early! the more wires you have down there, the harder it will be to install. The ESC's will be soldered directly to the motor wires you pulled through the frame. By default the motors should spin counter clockwise, just cross any two motor wires to change the motor direction. Just logic and battery wiring left*Step 5**FLY!!!!!: *And try not to crash. Maybe pick up a $30 micro drone to practice before smashing your beautiful drone.[1] http://www.MBSrobotics.com[2] http://www.battlebots.com/robot/basilisk/[3] http://www.Formlabs.com[4] http://www.hobbyking.com/hobbyking/store/__61433__DYS_BE1806_2300kv_Brushless_Multirotor_Motor_2S_3S.html[5] http://www.hobbyking.com/hobbyking/store/__2161__TURNIGY_Plush_12amp_2A_BEC_BESC.html[6] http://www.hobbyking.com/hobbyking/store/__8932__Turnigy_2200mAh_3S_20C_Lipo_Pack.html[7] http://www.hobbyking.com/hobbyking/store/__66683__Quanum_Carbon_Fiber_T_Style_Propeller_5x3_CW_CCW_2pcs_.html[8] http://www.hobbyking.com/hobbyking/store/__68813__AfroFlight_Naze32_Acro_FunFly_Controller_Soldered_version_Horizontal_Pin_.html[9] http://www.hobbyking.com/hobbyking/store/__8338__Hobby_King_2_4Ghz_4Ch_Tx_Rx_V2_Mode_2_.html[10] http://www.hobbyking.com/hobbyking/store/__49338__Turnigy_E3_Compact_2S_3S_Lipo_Charger_100_240v_US_Plug_.html
    Category: none
    Tags
    103Free
    Will add more info later. :D
    Category: none
    Tags
    I needed some new items for my office, so I decided to design a lamp. This lamp was done as an exercise to test out the Form 2 SLA 3D printer in combi
    Category: none
    Tags
    11322Free
    http://formlabs.com/en/company/blog/2014/09/24/lenses-3D-printed-formlabs/by Craig Broady
    Category: none
    Tags
    612Free

    Worm gear and chain

    Worm gear and chainpinshape.com
    Experiment to build a worm gear and chain using a Form2.
    Category: none
    Tags
    This is a cobra statue sculpted by Kent Trammell. It was the subject model for my CG Cookie course on 3D Printing with the Form 1+ from Formlabs:http://cgcookie.com/blender/cgc-courses/3d-printing-form-1-formlabs/
    Category: none
    Tags
    10596Free

    Deco AppleTV Remote Stand

    Deco AppleTV Remote Standthingiverse.com
    The new Apple TV is great with an enhanced remote that has great features. It is small however and likely to get lost. This mini dock is likely to hel
    Category: none
    Tags
    13159Free

    Adjustable Picture Hanger

    Adjustable Picture Hangerthingiverse.com
    This is an adjustable picture hanger, to be combined with: a nail whose shank can fit through the nail holder part and whose head can fit through the
    Category: none
    Tags
    1459Free

    EMAX 250 FPV Camera Mount Tilt for EACHINE 700TVL

    EMAX 250 FPV Camera Mount Tilt for EACHINE 700TVLthingiverse.com
    This mount tilts the FPV camera (EACHINE 700 tvl) up by 20 degrees. This is a must have when you start flying faster and your quadcopter stays tilted
    Category: none
    Tags
    22182Free
    This is a 3D printed magnifying glass printed using an SLA printer using clear resin. (Form1+ from Formlabs). After support removal and cleaning, use
    Category: none
    Tags
    13213Free

    Jaime Lannister Head Sculpt

    Jaime Lannister Head Sculptthingiverse.com
    This is an old practice sculpt created around two years ago of Jaime Lannister. The likeness and proportions are somewhat more caricature than accurat
    Category: none
    Tags
    16408Free

    Trimpot adjustment tool

    Trimpot adjustment toolthingiverse.com
    This is a little add-on part to turn a precision bit screwdriver (I use this one from Husky) into a trimmer potentiometer adjustment tool. You can buy
    Category: none
    Tags
    13150Free

    Eiffel Tower **IMPROVED**

    Eiffel Tower **IMPROVED**thingiverse.com
    Eiffel Tower **IMPROVED**
    Category: none
    Tags
    211.3KFree

    Watch 1.0 - 3D Conception

    Watch  1.0 - 3D Conceptionthingiverse.com
    Watch printed with a Formlabs.
    Category: none
    Tags
    13157Free

    Turtle dove tree ornament

    Turtle dove tree ornamentthingiverse.com
    Turtle doves represent friendship and love - a perfect message for your Christmas tree or Chanukah bush. There are two versions the difference is the
    Category: none
    Tags
    12418Free

    CAM-Source 3D: Formlabs resin tank storage rack

    CAM-Source 3D: Formlabs resin tank storage rackpinshape.com
    If you own a Form1/ Form1+ then you likely have multiple resin tanks for the various resins you print with. Even though they can be stacked, getting to a tank at the middle or bottom of a stack of 5 or so tanks, could be made easier.This is why we created our Resin Tank Storage for the Form1/ Form1+ owners. This Resin Tank Storage was designed to be 3D printed on a relatively typical sized 3D printer, yet large enough and robust enough to be trustworthy of tending to your precious 3D printing resins while they’re not inside of your printer. The Storage system can store up to 5 resin tanks, while making sure that the shelves never touch the delicate optical surface on the bottom the your tanks.Never fumble through stacks of resin tanks again! If you use, or plan to use more of the various resins available for your printer, then this Form1/ Form1+ Resin Tank Storage is a must-have addition!
    Category: none
    Tags

    OpenR/C 1:10 Formula 1 car

    OpenR/C 1:10 Formula 1 carcults3d.com
    Things to buy:Ok, obviously you need some filament which you´ll get from your favourite filament supplier.You also need M3 screws and nuts which you can get at your local hardware store. Check the BOM list for what to get.Some bearings are needed aswell, check the BOM list or buy a kit from FastEddyBearings.com:http://www.fasteddybearings.com/openrc-f1-sealed-bearing-kit/ [1]Last but not least you need electronics and here´s what i got, all from HobbyKing:ESC and motor combo:http://www.hobbyking.com/hobbyking/store/__65982__TrackStar_ROAR_approved_1_10th_Stock_Class_Brushless_ESC_and_Motor_Combo_21_5T_.html [2]Battery:http://hobbyking.com/hobbyking/store/__23134__Turnigy_nano_tech_Shorty_4200mah_2S2P_65_130C_Hardcase_Lipo_Pack_ROAR_APPROVED_.html [3]Micro Servo This is what i bought and i think it´s not very good, please let me know if you have a better revommendation.http://www.hobbyking.com/hobbyking/store/__7472__Turnigy_8482_TGY_1800A_Servo_1_5kg_0_10sec_8g.html [4]Transmitter and Receiver (i use something else but this is a "cheap" alternative):http://hobbyking.com/hobbyking/store/__83360__HobbyKing_174_8482_HK_GT2B_3CH_2_4GHz_Transmitter_and_Receiver_w_Rechargable_Li_ion_Battery.html [5]If you are new to this whole R/C hobby you´ll also need a LiPo charger for the battery. Ask in the Google + Community for recommendations:https://plus.google.com/u/0/communities/112745535856143176146 [6]Rain tires designed by Thomas Palm are available here:http://www.thingiverse.com/thing:999257 [7]Low profile rims & tires designed by Thomas Palm are available here:http://www.thingiverse.com/thing:1103751 [8][1] http://www.fasteddybearings.com/openrc-f1-sealed-bearing-kit/[2] http://www.hobbyking.com/hobbyking/store/__65982__TrackStar_ROAR_approved_1_10th_Stock_Class_Brushless_ESC_and_Motor_Combo_21_5T_.html[3] http://hobbyking.com/hobbyking/store/__23134__Turnigy_nano_tech_Shorty_4200mah_2S2P_65_130C_Hardcase_Lipo_Pack_ROAR_APPROVED_.html[4] http://www.hobbyking.com/hobbyking/store/__7472__Turnigy_8482_TGY_1800A_Servo_1_5kg_0_10sec_8g.html[5] http://hobbyking.com/hobbyking/store/__83360__HobbyKing_174_8482_HK_GT2B_3CH_2_4GHz_Transmitter_and_Receiver_w_Rechargable_Li_ion_Battery.html[6] https://plus.google.com/u/0/communities/112745535856143176146[7] http://www.thingiverse.com/thing:999257[8] http://www.thingiverse.com/thing:1103751
    Category: none
    Tags
    220Free
    I got a request to make a simple wirecanal for mounting on top of a car roof. The design is based on a regular canal, but added threads and 2 nuts for
    Category: none
    Tags
    11123Free

    Skull Cigar Case - Single Tube.

    Skull Cigar Case - Single Tube.thingiverse.com
    I love cigar, this skull case is for 12 cm thick wrapped cigar. The bottom tube is simple to make, you can make a 13.5 cm tube using any software. I p
    Category: none
    Tags
    15319Free

    Hollow Lara Croft Toon Figure - Optimized for SLA Printers

    Hollow Lara Croft Toon Figure - Optimized for SLA Printersthingiverse.com
    Hollow Lara Croft Toon Figure - Optimized for SLA Printers
    Category: none
    Tags
    10620Free
    A quick study of material transparency created for the Form 1+ SLA 3D printer. The model is based on components repurposed from my fall 2013 window
    Category: none
    Tags
    111.6KFree

    Form 1 Resin Tank Comb

    Form 1 Resin Tank Combthingiverse.com
    To filter the content of the resin tank for small particles, that sometimes float around in the resin after printing, I made a resin tank comb. It fit
    Category: none
    Tags
    7715Free

    Form 1+ Calibration perfect print

    Form 1+ Calibration perfect printthingiverse.com
    The model is used for testing the quality of printing of your Form 1+ if you can print all the 11 parts of this model without any problem your Form 1+
    Category: none
    Tags
    10637Free
    This cover works like the old "Fifteen game" but instead of having numbered tiles he chose to put colored filters and fish eye lenses in fro
    Category: none
    Tags
    9175Free
    This is something that will hopefully keep your knuckles from getting sliced to the bone by the razor sharp edge of the build plate on your Formlabs F
    Category: none
    Tags
    763Free
    Flying robot design. Printed at 100µ on the Form1 out of Clear Resin and painted. Would print nicely on an Up! printer as well. (Scale as
    Category: none
    Tags
    10173Free

    Low Poly Elephant pendant

    Low Poly Elephant  pendantthingiverse.com
    Upcycled the elephant from the Arimaa chess set to a crystal looking low-poly pendant. Printed on Form One by Formlabs Approx. Height 1.5 inches or 4
    Category: ANIMALS / Elephant
    Tags
    10708Free