Flightcontroller 3D model for printing: 47 results found

Displaying 1 - 32 of 47
  • Free
  • LUMENIER MICRO LUX F4 Adapter Flight controler 20x20mm/30.5x30.5mm

    LUMENIER MICRO LUX F4 Adapter Flight controler 20x20mm/30.5x30.5mmcults3d.com
    https://www.facebook.com/Microdure/ [1][1] https://www.facebook.com/Microdure/
    Category: none
    Tags
    190Free

    Adaptater Flight controler Femto SP Racing F3 Emax STM32F303 F3

    Adaptater Flight controler Femto SP Racing F3 Emax STM32F303 F3cults3d.com
    They can also be printed in Ninja Semiflex see Flex
    Category: none
    Tags
    140Free

    TPU flight controller softmount (universal)

    TPU flight controller softmount (universal)thingiverse.com
    simple softmount for the drone racer´s flight controller. it only makes sense to print it if you do it in flexible material. central hole is
    Category: none
    Tags
    325Free

    Flight Controller box for VAS Banshee

    Flight Controller box for VAS Bansheethingiverse.com
    Needed somewhere to put my flight controller on my second VAS Banshee, so I built this. it fits the on the bottom side of the airplane, just have to c
    Category: none
    Tags
    013Free

    Minim Micro OSD Holder V2

    Minim Micro OSD Holder V2thingiverse.com
    Minim Micro OSD Halter. zurm Montage über der FC
    Category: none
    Tags
    297Free
    As the name suggests, a nice way to place your beeper on a miniquad. 30.5x30.5 mounting holes fits D4R, X4R and several other receivers
    Category: none
    Tags
    8281Free

    QAV250 LED-Strip side panel for 12mm RGB LEDs

    QAV250 LED-Strip side panel for 12mm RGB LEDsthingiverse.com
    QAV250 LED-Strip side panel for 12mm RGB LEDs 30,5mm - for mounting underneath the Flightcontroller.
    Category: none
    Tags
    734Free

    WiFree Copter, .... the Rasp.Pi lerns to fly by Android

    WiFree Copter, .... the Rasp.Pi lerns to fly by Androidthingiverse.com
    WiFree Copter www.open-DIY-projects.com / https://youtu.be/A6Zq8fR1DmM Description in few words: the WiFree Copter is a 100% 3D-printing Copter, wit
    Category: none
    Tags
    10748Free

    30mm spacing, Simple flight controller cover

    30mm spacing, Simple flight controller coverthingiverse.com
    A simple flight controller cover, holes have 30mm spacing, outer edge is 40mm, its 2mm thick and have 3mm screw holes.
    Category: none
    Tags
    967Free

    35mm spacing, Simple flight controller cover

    35mm spacing, Simple flight controller coverthingiverse.com
    A simple flight controller cover, holes have 35mm spacing, outer edge is 45mm, its 2mm thick and have 3mm screw holes.
    Category: none
    Tags
    1051Free

    Collapsible Airfoil GPS Stand for Pixhawk and Other Flight Controllers

    Collapsible Airfoil GPS Stand for Pixhawk and Other Flight Controllersthingiverse.com
    A GPS stand for Pixhawk and other flight controllers. Around 70mm tall. The stand is friction fit into the base and can be removed to collapse the sta
    Category: none
    Tags
    11109Free
    This is a 3d printable open source helicopter control set, that can be built with minimum of non-printed additional parts (608 bearings, m8 and m3 bol
    Category: none
    Tags
    5218Free

    Eachine H8 Stick Extender - Xbox Control Freak Inspired

    Eachine H8 Stick Extender - Xbox Control Freak Inspiredthingiverse.com
    By attaching this to your factory Eachine H8 Controller joysticks you will a become more proficient pilot and be able to maneuver the drone with great
    Category: none
    Tags
    6241Free
    Navio2+RPI2 Case
    Category: none
    Tags
    2226Free

    Crius AIOP v2 protective plate

    Crius AIOP v2 protective platethingiverse.com
    Recently finished my prusa i3 and after some calibration this is one of my first test designs. A protective plate for my flight controller Crius AIOP
    Category: none
    Tags
    9104Free

    CC3D Atom box [clone version]

    CC3D Atom box [clone version]pinshape.com
    This box allows you to fix the CC3D Atom board on a standard 30.5mm footprint.It allows the routing of cables under the case.The box is only suitable for clone CC3D Atom flight controller.There are two different board layout on the market today. Please, refer to the attached images to determine if your flight controller is suitable.If you have the genuine OP layout, please refer to this box https://pinshape.com/items/10320-3d-printed-openpi... [1]The top cover has the LibrePilot logo.The reason is because LibrePilot still supports CC3D/Atom. Based on Fredrik Arvidsson revonano original OpenPilot design (m-thread on forums) published here: http://www.rcgroups.com/forums/showpost.php?p=320... [2][1] https://pinshape.com/items/10320-3d-printed-openpilot-atom-box[2] http://www.rcgroups.com/forums/showpost.php?p=32005213&postcount=195
    Category: none
    Tags
    250Free

    Easy Print Anti-vibration Rubber Shock Absorber Ball

    Easy Print Anti-vibration Rubber Shock Absorber Ballthingiverse.com
    I printed these with ninjaflex and they printed and worked great! they are beveled so that there is no need for support eliminating any overhangs. eve
    Category: none
    Tags
    4147Free

    Flight controller anti-vibration box

    Flight controller anti-vibration boxthingiverse.com
    Box for flight controller and receiver to minimize exposure to air turbulences and weather. Holes are designed for these dampeners: www.amazon.com/gp/
    Category: none
    Tags
    1265Free
    This is a little beefier control horn. The dimensions are: -Length: 25mm -Width: 13mm -Height 18mm And the diameter of the hole is 2mm.
    Category: none
    Tags
    736Free

    Vector Flight Controller Anti-Vibe Mount

    Vector Flight Controller Anti-Vibe Mountthingiverse.com
    Made because I just got the Vector and realized they expect you to mount it with sticky tape! Inspired by an awesome APM mount I found on the net that
    Category: none
    Tags
    0182Free
    Naze 32 Case
    Category: none
    Tags
    113KFree

    Naze32 Antivibration Case

    Naze32 Antivibration Casethingiverse.com
    Naze32 Antivibration Case
    Category: none
    Tags
    22723Free

    Stack plate for flight controller like Naze32, Flip, CC3D, etc.

    Stack plate for flight controller like Naze32, Flip, CC3D, etc.thingiverse.com
    Simple clear plate that can be used to stack mount items onto flight controller boards with 30mm hole spacing, such as: Naze32 Flip32 CC3D et
    Category: none
    Tags
    1502Free

    Multicopter 30mm to 50mm adapter

    Multicopter 30mm to 50mm adapterthingiverse.com
    This adapter was created to allow for easier mounting of larger flight controllers (kk2) or PDBs to frames that only have 30mm mounting holes.
    Category: none
    Tags
    258Free
    A full-size case for the AUAV-X2 Flight Controller, a very compact Pixhawk-Clone. All pins and sockets are protected. No screws needed, top and bott
    Category: none
    Tags
    2308Free

    kk 2.1.5 flight controller case

    kk 2.1.5 flight controller casethingiverse.com
    Just a little case to help keep your flight controller in one piece.
    Category: none
    Tags
    2500Free

    Electric Bezel - gauge electrique overhead -beechcraft b200

    Electric Bezel - gauge electrique overhead -beechcraft b200thingiverse.com
    Like true reel indicator with information of this good blog http://tabar57.blog4ever.net/construction-de-l-overhead This version no have servo support
    Category: none
    Tags
    17270Free

    Naze32 Antivibration Case

    Naze32 Antivibration Casenunus-world.com
    This is an anti-vibration adaptation of my Naze32 case (http://www.thingiverse.com/thing:594820 [1]).Inspired by Guy McCaldin's designs (http://www.thingiverse.com/GuyMcCaldin/about [2]), I adapted his approach to my Naze32 case.UPDATE 1: Removed files that gave at least one person troubles. Replaced them with fixed files.UPDATE 2: To answer a couple inquiries, this was printed in PET+. I haven't gotten the printer dialed in for this filament yet so its a bit stringy. Please forgive the relatively poor quality of the print. I printed the original case in PLA, which is why the case looks a bit better in the original design. If your printer is working well, this should print nicely and all parts should fit well. All you have to do is snap the support posts out of the nut / bolt wells and you are ready to assemble.Naze32 Antivibration Case [3] by Neo_Usagi [4] is licensed under the Creative Commons - Attribution - Share Alike [5] license.[1] http://www.thingiverse.com/thing:594820[2] http://www.thingiverse.com/GuyMcCaldin/about[3] http://www.thingiverse.com/thing:715165[4] http://www.thingiverse.com/Neo_Usagi[5] http://creativecommons.org/licenses/by-sa/3.0/
    Category: none
    Tags

    City STL Springfield Gardens

    City STL Springfield Gardensnunus-world.com
    Designed by NuNus3D Online STL Creator"
    Category: GADGETS / Text
    Tags
    519Free

    CC3D Flight Controller Platform for Crossfire 2 quadcopter

    CC3D Flight Controller Platform for Crossfire 2 quadcopternunus-world.com
    Platform for a CC3D flight controller, compatible with Crossfire 2 quadcopter design. 30mm on-center between holes for flight controller. Replaces flight controller platform in existing design (which is too large for a CC3D). Bolts via standoffs to APM platform. 2 shells 50% infill ABS recommended.CC3D Flight Controller Platform for Crossfire 2 quadcopter [1] by brianthebald [2] is licensed under the Creative Commons - Attribution - Share Alike [3] license.[1] http://www.thingiverse.com/thing:747119[2] http://www.thingiverse.com/brianthebald[3] http://creativecommons.org/licenses/by-sa/3.0/
    Category: none
    Tags

    Silicone mold for "Omnimac" style vibration dampers

    Silicone mold for "Omnimac" style vibration dampersrepables.com
    This mold is part of my 3D Printed QuadCopter project. Check out all of the files and a build log on Instructables! http://goo.gl/wD0f3K [1] I drew this mold for making omnimac vibration dampers to isloate a multicopter flight controller. They work on flight controller mounts like these: https://www.thingiverse.com/thing:160655 [2] and https://www.thingiverse.com/thing:163494 [3] I created the mold based on these dimensions from a ThingiVerse object that isn't downloadable anymore. http://thingiverse-production.s3.amazonaws.com/renders/23/00/f6/55/49/Omnimac_v1_preview_featured.jpg [4][1] http://goo.gl/wD0f3K[2] https://www.thingiverse.com/thing:160655[3] https://www.thingiverse.com/thing:163494[4] http://thingiverse-production.s3.amazonaws.com/renders/23/00/f6/55/49/Omnimac_v1_preview_featured.jpg
    Category: none
    Tags
    104.7KFree