Drone 3D model for printing: 1152 results found

Displaying 1 - 32 of 1152
  • Free
  • LUMENIER MICRO LUX F4 Adapter Flight controler 20x20mm/30.5x30.5mm

    LUMENIER MICRO LUX F4 Adapter Flight controler 20x20mm/30.5x30.5mmcults3d.com
    https://www.facebook.com/Microdure/ [1][1] https://www.facebook.com/Microdure/
    Category: none
    Tags
    110Free

    Adapter Lemon Rx DSMX PPM Diversity Antenna Receiver

    Adapter Lemon Rx DSMX PPM Diversity Antenna Receivercults3d.com
    Here is a protection In TPU ultimaker (ninjatek) for the receiver Lemon Rx on a chassis 30.5x30.5
    Category: none
    Tags
    130Free

    Furious Mini RX FRSKY Adapter Receiver + Buzzer 9mm

    Furious Mini RX FRSKY Adapter Receiver + Buzzer 9mmcults3d.com
    Buzzer 9mm :http://www.banggood.com/5V-Buzzer-Alarm-Beeper-With-Cable-for-Eachine-QX70-QX90-QX95-NAZE32-F3-DIY-Micro-Brushed-FPV-Racer-p-1100338.html?p=LD020411878172015024 [1][1] http://www.banggood.com/5V-Buzzer-Alarm-Beeper-With-Cable-for-Eachine-QX70-QX90-QX95-NAZE32-F3-DIY-Micro-Brushed-FPV-Racer-p-1100338.html?p=LD020411878172015024
    Category: none
    Tags

    Drone V3 RedManga 3D Model

    Drone V3 RedManga 3D Model3dexport.com
    Drone V3 RedManga 3D Model
    Category: none
    Tags

    Medium sentry drone 3D Model

    Medium sentry drone 3D Model3dexport.com
    Medium sentry drone 3D Model
    Category: none
    Tags

    Drone v9 Cybertech 3D Model

    Drone v9 Cybertech 3D Model3dexport.com
    Drone v9 Cybertech 3D Model
    Category: none
    Tags

    Drone Flying Prosthetic

    Drone Flying Prostheticpinshape.com
    This will let you to fly an Air Hogs [1] drone with only your right hand. This is also a science fair project, so it would be appreciated if you could fill out the form linked at the end.Instructions to be able to assembly and fly it are linked below:Instructions [2]Have fun flying! And please fill out the form at the end. I would like to get as many forms filled out by February 25 as possible so I would be very grateful if you could contribute to that. Also, because this is a science project and I am looking for volunteers, this product will be free for anyone who participates in the study. Keep in mind, your information will remain anonymous in the final product, so if that was you have no reason to decline filling out the form at the end.If you have any questions, you can email me at [email protected] [3]/* */[1] https://www.amazon.com/Air-Hogs-Hyper-Unstoppable-Yellow/dp/B01KNOAIFO/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1485668973&sr=1-1&keywords=air+hogs+drone[2] https://docs.google.com/document/d/1sFA2l2qYWzKigvQmuIjfz-l1wVO5NZH7XTao4LdQs7c/edit?usp=sharing[3] /cdn-cgi/l/email-protection
    Category: none
    Tags

    Frame anti obsolescence for Blade Nano QX 3D

    Frame anti obsolescence for Blade Nano QX 3Dcults3d.com
    Video: https://youtu.be/B-eR4ecCVa8 [1][1] https://youtu.be/B-eR4ecCVa8
    Category: none
    Tags
    il y a 40Gr de matière mais presque 5h d'impression :)
    Category: none
    Tags

    Whoop Drone Cross 4S Night Flight Acro

    Whoop Drone Cross 4S Night Flight Acrocults3d.com
    https://www.facebook.com/Microdure/ [1][1] https://www.facebook.com/Microdure/
    Category: none
    Tags

    Big Whoop 170mm 4S polycarbonate

    Big Whoop 170mm 4S polycarbonatecults3d.com
    https://www.youtube.com/watch?v=v0UoCCKYygs&feature=youtu.be [1][1] https://www.youtube.com/watch?v=v0UoCCKYygs&feature=youtu.be
    Category: none
    Tags
    120Free

    Adaptater Flight controler Femto SP Racing F3 Emax STM32F303 F3

    Adaptater Flight controler Femto SP Racing F3 Emax STM32F303 F3cults3d.com
    They can also be printed in Ninja Semiflex see Flex
    Category: none
    Tags

    Protection polycarbonate Camera FPV Super Mini 25mW Eachine TX01 / TX02 200mw

    Protection polycarbonate Camera FPV Super Mini 25mW Eachine TX01 / TX02 200mwcults3d.com
    It takes just two screws M1.6 10mm to secure the two parts
    Category: none
    Tags
    120Free

    Mini Quad Acro 120mm Micro Pico F3 Brushless 1103 2S 10.000kv

    Mini Quad Acro 120mm Micro Pico F3 Brushless 1103 2S 10.000kvcults3d.com
    Connection screws: M1.6x12mm
    Category: none
    Tags
    100Free

    Hexacopter 1S/2S 125/110mm spracing f3 coreless 8.5x20mm

    Hexacopter 1S/2S 125/110mm spracing f3 coreless 8.5x20mmcults3d.com
    Video: https://www.youtube.com/watch?v=hIGqBvBNkz0 [1]https://www.youtube.com/watch?v=7sZic1SJOCc [2][1] https://www.youtube.com/watch?v=hIGqBvBNkz0[2] https://www.youtube.com/watch?v=7sZic1SJOCc
    Category: none
    Tags

    Micro FPV Quad-racer 2S 90mm polycarbonate

    Micro FPV Quad-racer 2S 90mm polycarbonatecults3d.com
    https://www.facebook.com/Microdure/ [1][1] https://www.facebook.com/Microdure/
    Category: none
    Tags
    120Free

    Mini Quadcopter fpv Racer 120mm micro FC lumenier racing F4 Brushless 1103 10.000kv 2S

    Mini Quadcopter fpv Racer 120mm micro FC lumenier racing F4 Brushless 1103 10.000kv 2Scults3d.com
    2 x M1.6 screws of 16 mm for the lipo fixationIt will be necessary to change the order of the signal cables ESC on the plug when entering the controller.You will find the correct order in picture 8.The VTX unify heats very hard, I used a velcro to limit the heat and avoid the flipping of double faces classics
    Category: none
    Tags
    110Free

    Tiny Whoop 2S 90mm Polycarbonate

    Tiny Whoop 2S 90mm Polycarbonatecults3d.com
    https://www.facebook.com/Microdure/ [1][1] https://www.facebook.com/Microdure/
    Category: none
    Tags
    120Free

    Robot ARU-01 bipedal humanoid walker 3D Model

    Robot ARU-01 bipedal humanoid walker 3D Model3dexport.com
    Robot ARU-01 bipedal humanoid walker 3D Model
    Category: none
    Tags

    Taranis stand with own logo

    Taranis stand with own logothingiverse.com
    Dieses Ding wollte ich eigentlich schon lange mal hochladen... Passt eigentlich auf alle Funken mit Bügel wie Taranis, Futaba, Graupner, …
    Category: none
    Tags
    5211Free

    Pocket drone H30CH case

    Pocket drone H30CH casecults3d.com
    Simple case for pocket drone H30CH.
    Category: none
    Tags

    DARKVADOR ANTENNE GUARD

    DARKVADOR ANTENNE GUARDcults3d.com
    protection antenne pour qx95
    Category: none
    Tags

    yoda antenne guard

    yoda antenne guardcults3d.com
    protection antenne pour qx95
    Category: none
    Tags

    Tarantula X6 Undercarriage

    Tarantula X6 Undercarriagethingiverse.com
    Undercarriage to add custom attachments too.
    Category: none
    Tags

    Tinywhoop carbon/alu frame basic camera support

    Tinywhoop carbon/alu frame basic camera supportthingiverse.com
    Some tests for my whoop CF/Alu frame
    Category: none
    Tags
    214Free

    PH145 Brushless FPV Quadcopter

    PH145 Brushless FPV Quadcopterthingiverse.com
    The PH145 quadcopter was inspired by the RS90 and DJ105 brushless quadcopters. The RS90 looked like fun, but the DJ105 wasn't much bigger and pr
    Category: none
    Tags
    895Free
    Just a design... Slice in half to make room for wires
    Category: none
    Tags
    315Free

    Viper X210 FPV Quadcopter Frame

    Viper X210 FPV Quadcopter Framepinshape.com
    This is a frame for a freestyle/racing sized quadcopter. It is designed to be an insanely fast, lightweigth and aerodynamic frame, while still enduring hard crashes. The frame can be printed without support on 200mm*200mm printbeds. It fits standard 2205/2204 motors and electronics with 30.5mm mounting hole spacing, making it compatible with most racing quadcopter equipment. It is an updated version of my 190 frame, with a stronger pod that doesn't break as easily. The weight of the frame is under 100 grams with my print settings (baseframe 75g + pod 20g)This part needs to be printed in a strong and rigid material. While PLA will work, it’s brittle and will snap on very hard crashes, but otherwise the quadcopter will fly well. ABS, what I have used, works really well, other materials worth considering are PETG, nylon or polycarbonate if you can print those.If you are printing ABS, acetone smoothing is highly recommendable. It increases the strengthening of layer bonds via the reduction of surface stress concentrations. [1]I didn’t have a large enough container to smooth the frame, so I painted on a mixture of acetone and ABS plastic.I used 60% triangular infill, with 3 shells, top, and bottom layers for maximum strength.AeoropodThis part would ideally be printed with a flexible material like TPU or TPE, but I don’t have that and printed it in PLA. That has worked well so far. You need support for the screw holders, and these needs to be added manually to not get support structure all over the part, as this is not needed. Use meshmixer if your slicer doesn't support manual support.This is the parts I would recommend if you want to enter the world of miniquads on a budget.Motors: BR2205S-2300KV [2]ESCs: RS20A-V2 [3]Flight controller: Naze 32 [4]PDB: Matek PDB [5]Propellers: Racerstar 5042 3 Blade [6]Nylon spacer screws [7]Battery straps [8]*FPV Gear*You can fly the quadcopter without the fpv gear, but it is highly recommended to use it.Camera: I have designed the pod for the RunCam PZ0420M [9] camera.VTX: Eachine ET526 5.8G 40CH 25mW200mW600mW Switchable FPV Transmitter [10]Antenna: Aomway 5.8GHz FPV 4 Leaf Clover AV Transmission RHCP Antenna [11]*Misc*For a transmitter I would recommend getting a Taranis X9D PLUS, it's a fantastic transmitter that you can use for years. If you have a tight budget, get the FS i6 [12], or the Turnigy Evolution [13]4s batteries are absolutely recommended, the Infinity Graphene [14] are great and cheap.[1] https://engineerdog.com/2015/05/04/effect-of-acetone-vapor-polishing-on-3d-printed-abs-parts/[2] http://www.banggood.com/4X-Racerstar-Racing-Edition-2205S-BR2205S-2300KV-2-4S-Brushless-Motor-For-X210-220-QAV250-FPV-Frame-p-1101511.html?rmmds=search[3] http://www.banggood.com/4X-Racerstar-RS20A-V2-New-20A-Blheli_S-OPTO-2-4S-ESC-Support-Oneshot42-Multishot-for-FPV-Racer-p-1074732.html?rmmds=search[4] http://www.banggood.com/Upgrade-NAZE32-F3-Flight-Controller-Acro-6-DOF-Deluxe-10-DOF-for-Multirotor-Racing-p-1010232.html?rmmds=category[5] http://www.banggood.com/Matek-PDB-BEC-5V-3A-LED-Lighting-Control-Tracker-Low-Voltage-Alarm-LED-POWER-HUB-5in1-p-991017.html[6] http://www.banggood.com/10-Pairs-Racerstar-5042-5x4_2x3-3-Blade-Propeller-5_0mm-Mounting-Hole-For-FPV-Racing-Frame-p-1112633.html?rmmds=search[7] http://www.banggood.com/180-Pcs-Black-Nylon-Screw-Nut-Screw-Washer-8-Sizes-10-Grids-p-1071923.html?rmmds=search[8] http://www.banggood.com/5PCS-Banggood-Battery-Tie-Down-Strap-for-RC-Multirotor-p-1067255.html?rmmds=search[9] http://www.banggood.com/RunCam-PZ0420M-L24-2_4MM-1203M-600TVL-DC-5-17V-Wide-Voltage-Mini-FPV-Camera-p-1017673.html?rmmds=search[10] http://www.banggood.com/Eachine-ET526-5_8G-40CH-25mW200mW600mW-Switchable-FPV-Transmitter-p-1075702.html?rmmds=search[11] http://www.banggood.com/Aomway-5_8GHz-FPV-4-Leaf-Clover-AV-Transmission-RHCP-Antenna-1-Pair-p-961730.html?rmmds=search[12] http://www.banggood.com/FlySky-FS-i6-2_4G-6CH-AFHDS-RC-Transmitter-With-FS-iA6B-Receiver-p-983537.html?rmmds=search[13] https://hobbyking.com/en_us/fpv-racer-radio-mode-2-white.html[14] http://www.banggood.com/Infinity-4S-14_8V-1500mAh-70C-Graphene-LiPo-Battery-XT60-Support-15C-Boosting-Charge-For-Racer-Drone-p-1058084.html?rmmds=search
    Category: none
    Tags
    101Free

    Big Whoop 160mm 4S polycarbonate

    Big Whoop 160mm 4S polycarbonatepinshape.com
    Here is one of my latest Ultimaker Polycarbonate prototype.Built with rest of material "drawer bottom"A 160mm Quadcopter equipped with 79mm CW & CCW turbines:http://www.banggood.com/68mm-CW-89mm-5-Blades-CWCCW-Propeller-For-EDF-Unit-p-1095039.html?rmmds=myorder?p=LD020411878172015024 [1]Brushlees 2212 4S 1400KV:http://www.encorerc.com/outlaw-power-1/ [2]Quad ESC 4X30Amp:http://www.banggood.com/Racerstar-RS30Ax4-V2-30A-BLheli_S-BB2-2-6S-4-in-1-ESC-Support-Oneshot42-Multishot-for-FPV-Racer-p-1083189.html?rmmds=myorder?p=LD020411878172015024 [3]Flight Controller:http://www.banggood.com/Upgrade-NAZE32-F3-Flight-Controller-Acro-6-DOF-Deluxe-10-DOF-for-Multirotor-Racing-p-1010232.html?rmmds=search?p=LD020411878172015024 [4]Receiver: ppm DSMX Lemon RXThe VTX part and feet are made of Nijaflex[1] http://www.banggood.com/68mm-CW-89mm-5-Blades-CWCCW-Propeller-For-EDF-Unit-p-1095039.html?rmmds=myorder?p=LD020411878172015024[2] http://www.encorerc.com/outlaw-power-1/[3] http://www.banggood.com/Racerstar-RS30Ax4-V2-30A-BLheli_S-BB2-2-6S-4-in-1-ESC-Support-Oneshot42-Multishot-for-FPV-Racer-p-1083189.html?rmmds=myorder?p=LD020411878172015024[4] http://www.banggood.com/Upgrade-NAZE32-F3-Flight-Controller-Acro-6-DOF-Deluxe-10-DOF-for-Multirotor-Racing-p-1010232.html?rmmds=search?p=LD020411878172015024
    Category: none
    Tags
    109Free
    Parts list:2x gate plugs - 3d file provided2x connector plugs - 3d file provided3x pool noodles2x driveway markers
    Category: none
    Tags