This product functions as a charging cable that can be flexed to ideal shape, while providing extra support in between the lightning connection input and the phone. Similar devices such as Trunk can break easily while bending and are rather unstable. Ideally this product should be printed using a semi-flexible Shape-memory polymer. The product will work with iPhone 6 and 6s Belkin 6" Lightning Charger Sync Cable - White (F8J023bt06INWHT)
iPhone shelf that mounts atop the iPhone plug-in cube. The shelf is designed to accommodate an iPhone and case including cases as large as an Otterbox. iPhone will rest at an incline with its center of gravity back against the wall so its weight will not pry the plug loose. The three sides of the phone with ports, buttons and speakers remain accessible while on the stand. The screen also remains visible and unobstructed.It is designed to be printed in two sections for best resolution (see print deck image); the two parts to be clued together once printed. Locating buttons on mating surfaces assure accurate alignment.Software used was Solidworks.Finished dimensions: H 3.5" x W 5.25" x D 1.5".Volume = 2.19 cu/in -or 35.87 cu/cm
This is a fanciful, yet functional rotating, spiral bevel gear, iPhone dock. Yep, that's a mouthful. This is the fun and ultimate EngiNerdy desk piece. Anyway, I'm an engineer by trade, so I'm a gear head. This dock was designed for the OEM Apple lightning cord to route through the rotational shaft/base. This is to prevent binding when the assembly rotates. I used GearTrax CAD software to create a perfect spiral bevel gear mesh at a 3:1 reduction. I printed this in eSun white PLA on an Ultimaker 2 Extended:
This is a desktop stand for fitbit's "fitness watch" Surge. The usb charging cable can be mounted in the rectangular cutout using a little force. It´s meant to have a tight fit to stay in place, depending on material, shinkage etc the fit may vary.
3D wireframe model of the Triband Plus: The Wearable Backup Battery, Charging Cable, Flash Drive OTG, and Flashlight that has no wish to meddle with fitness. It aims to provide a useful array of utility functions for keeping your smartphone going longer on its emergency backup battery, or avoid bring long tangling charging cables on your commute or travels. The files stored in your flash drive can be viewed on your PC or Smartphone at anytime. While in the dark, if you need to look for your wallet or other personal items, Triband Plus will act as a bright torch that can last up to 20 hours of constant use.Currently, Triband Plus is on indiegogo attempting to raise $10000 USD which can be found here:https://www.indiegogo.com/projects/triband-plus-the-wearable-that-charges-your-phone/x/4249442#/story
I recently purchased this Black Stainless Steel Watch Band  for my LG G Watch. It looks great, but makes it impossible to use the charging cradle flat as it was designed, as the watch band doesn't open completely. Instead you have to put the cradle inside the band to charge the watch. This isn't terrible, but it's not great either. Plus, charging the watch flat on a table has no added utility. http://www.amazon.com/gp/product/B00VWY7UBA
Tired on fumbling around with charging cables and having to leave your drone on the floor next to your power point like a chump? Then look no further than the new Mini-Drone Wall Nest from Mutant Design!