Camera mount 3D model for printing: 32 results found

Displaying 1 - 32 of 32
  • Free
  • Inductrix Micro Camera Mount - Another Variation

    Inductrix Micro Camera Mount - Another Variationthingiverse.com
    Simple camera mount for the Inductrix / Tiny Whoop. This is just my variation of some of the designs already on Thingiversion. Enjoy
    Category: none
    Tags
    21.9KFree
    low profile version of the fpv ring mount
    Category: none
    Tags
    4262Free

    [V3] Universal camera mount standing & printer mount

    [V3] Universal camera mount standing & printer mountthingiverse.com
    Pictures are outdated to the V3 version, youtube video is current version. Appriciate it for subscribing me! UNIVERSAL ACTION CAMERA MOUNT https://you
    Category: none
    Tags
    38818Free

    Aomway 1200tvl / zmr250 mount

    Aomway 1200tvl / zmr250 mountthingiverse.com
    Aomway 1200tvl ccd camera mount for zmr250 frame. I dremel upper plate to get more angle and i got about 30deg shown in the picture. Added holes if yo
    Category: none
    Tags
    1432Free

    Raspberry Pi Cam Holder for Printers

    Raspberry Pi Cam Holder for Printersthingiverse.com
    The Cam is tight fitted into the cam holder. Balljoint is fitted too. Screw it into place with an M8 screw or what you want ;) This is printed in PETG
    Category: none
    Tags
    13167Free

    Front Standoff Camera Mount For The Atom Rx122

    Front Standoff Camera Mount For The Atom Rx122thingiverse.com
    This is a camera mount for the atom Rx122 that replace the front standoffs. It has a 12 degree or a 20 degree angle and fit the CC1563 camera (the 600
    Category: none
    Tags
    15349Free

    ikea tertial camera mount

    ikea tertial camera mountthingiverse.com
    This is a camera mount for an Ikea Terial lamp. It comes in 2 flavors, a 1 axis rotating mount, and a straight camera mount. I designed this to attach
    Category: none
    Tags
    14232Free

    Dual SJ4000 Camera Mount for Blade QX350

    Dual SJ4000 Camera Mount for Blade QX350nunus-world.com
    This mount allows for two SJ4000 (or similar) cameras to be mounted on a Blade QX350 quadcopter to collect aerial imagery. The SJ4000 is easily modified to collect near-ir images so that flying two makes for a small multispectral platform. Velcro straps from a local hardware securely hold these cameras to the mount. The SJ4000 works best at 10MP settings and can be set to collect an image every 5 seconds.Dual SJ4000 Camera Mount for Blade QX350 [1] bymaoneal [2] is licensed under the Creative Commons - Attribution - Share Alike [3] license.[1] http://www.thingiverse.com/thing:711075[2] http://www.thingiverse.com/maoneal[3] http://creativecommons.org/licenses/by-sa/3.0/
    Category: none
    Tags

    PRINTED - Ultimate Tripod Mount for OnePlus One V2.0

    PRINTED - Ultimate Tripod Mount for OnePlus One V2.0youmagine.com
    The ultimate Tripod Mount for the OnePlus One gives you the ability to mount your OnePlus One on a tripod.*Improved the shutter button,* the bigger button is more clickier and more snapier than the original which gives you a better, steadier shot.*physical zoom buttons,* the added physical buttons gives you the ability to easily zoom with your OnePlus OneVersion *2*:-*Better printable*-Better fit -Better physical buttons-Tripod tread pre printed
    Category: none
    Tags
    16431Free

    Robo3D Camera Mount Platform

    Robo3D Camera Mount Platformyoumagine.com
    This camera mount attaches to the front (or rear) bed platform support and allows any tripod socketed camera to mount in front of the print bed. Replace the existing M4 screw holding the tension block with one 10 mm longer. The remaining hole will receive a M4 x 15 mm screw and nut to affix the camera platform. The tabs are to assist in preventing twisting. Print with at least 20% infill and upside down. It will print with no supports.IGES and STEP files included if you care to remix or redesign this model.
    Category: none
    Tags
    17335Free

    Prusa i3 Swivel camera mount

    Prusa i3 Swivel camera mountyoumagine.com
    Actually being printed.Best result if printed with 0,3 layer and 35% infill3 perimeter suggested.Assembly video available here
    Category: 3D PRINTING / Prusa
    Tags
    161Free

    OnePlus Anything Stand, Tripod Mount, Camera Grip

    OnePlus Anything Stand, Tripod Mount, Camera Gripyoumagine.com
    This device is designed exclusively for the OnePlus One phone for printing on the Ultimaker line of printers.For desktop use, the device features easy USB cable routing/engagement/disengagement, audio-enhancing front speaker grilles, and a comfortable viewing angle for both portrait and landscape configurations.Disengage the cable and the device is a camera grip with an integrated, widely-available 1/4"-20 threaded insert for monopod or tripod mounting. The grip has been designed in the spirit of the excellent Panasonic GH2 mirrorless camera. Special attention has been paid to the ergonomics, which include a finger shelf for control, and an asymmetric grip that fits the curvature of a variety of hand sizes. The speaker grilles provide lower palm grip and thumb retention for enhanced control.The OnePlus One can be easily engaged/disengaged from the device with the thumb-tab at the top of the phone. All buttons, speakers, microphones, and other functional items are usable with the phone in the device (the Sim card slot is covered by the case). Particular care was taken to ensure that the main and auxiliary echo/noise cancelling microphones are not covered by the case.For printing, we suggest that the print be arranged with the device in landscape mode on the build platform.This device is submitted in connection with the Ultimaker/OnePlus design contest. Happy printing!
    Category: none
    Tags
    10497Free

    Oneplus one case with AWG tech, camera button & lot more...

    Oneplus one case with AWG tech, camera button & lot more...youmagine.com
    This case uses AWG - *Aural Wave Guide technology* to amplify & improve the quality of your  listening experience.It has an actual physical *camera **button* ! yes you read that right.  a standard 1/4-20 UNC compatible thread to mount your tripods or anything to satisfy your photography needs.It comes with a built-in stand that works in both portrait and landscape position. So you can now watch your favourite videos effortlessly with the best listening experience.And it also has a provision to attach a strap, so no more accidental drops.The case has 8 parts, which have to print separately and assembled together. you may need a glue to stick some of the parts permanently.The internal structure are provided with ample support for easier 3D printing.Hope everyone likes it & find it useful. let me know your opinions & suggestions are always welcome :)Happy 3D printing
    Category: none
    Tags

    GoPro mount for printable quadcopter

    GoPro mount for printable quadcopteryoumagine.com
    Add-on for http://www.youmagine.com/designs/3d-printable-quadcopter [1][1] http://www.youmagine.com/designs/3d-printable-quadcopter
    Category: ELECTRONICS / GoPro
    Tags
    5125Free

    Baby Monitor Camera Mount

    Baby Monitor Camera Mountyoumagine.com
    Supports recommended for counter sunk hardware holes.
    Category: none
    Tags
    5149Free

    Ultimaker 2 Camera Mount

    Ultimaker 2 Camera Mountyoumagine.com
    This is designed to bolt right to the side of your Ultimaker 2. I use it for mounting an old Samsung i9000 cell phone to stream video online so I can monitor the print progress while I'm out.It is a little under engineered for heavier cameras I would suggest. I made the mount universal so just stick your camera on with double sided tape.A couple of parts need to be glued together. I will upload the .stl file and also native format inventor .ipt
    Category: none
    Tags

    RasPi B+ camera mount

    RasPi B+ camera mountyoumagine.com
    The assumption is that you already have a Raspberry Pi Model B+, the Pi Camera module of your choice, any extension cable and the capture software for taking the images and converting to a movie etc.This thing is a modular harness that will attach and support the Pi and the camera module onto the front or side of an Ultimaker 2. The camera can be moved into any position in 2 planes (there is no rotation) so it can look down on your print, or hanging underneath look directly at your print.It should also be noted that the focal length of the PI Cam module is about 45cm. For this reason you'll probably want to hotglue a +2.0 reading glass lens over the front of the module to get this back in the region of 20-25cm... where this camera actually sits from the center of the build plate.*Instructions*For the pi you will need a Pi Frame Front, a Pi Frame Back, a hook of your choice (depending on where you'l like to situate your Pi - I'd suggest the side) and a bolt of your choosing. Assembly should be pretty self explanatory.For the camera mount you will need the pi cam mount, and the mount block which needs to be glued into the recess in the mount - I couldn't think of a more elegant solution. You then need a hook of your choosing (I'd suggest the front) and a regular sized bolt - the big one is too big.You then need at least 2 arm pieces to give the flexibility and a bolt of your choice for each. The mount block has the thread so you need to bolt through the hole in the arm into the block. The same then happens for the second arm.You should then press the Pi Camera Module into the slot in the camera head. be careful not to dislodge the yellow block under the camera lens - the next iteration of this will have more space here :)You can now hotglue the lens from the glasses over the camera lens and the camera head should then bolt through to the top of the last arm piece.
    Category: none
    Tags

    OnePlus One Camera Tripod Mount

    OnePlus One Camera Tripod Mountyoumagine.com
    This Model is for the Oneplus Ultimaker Competition.*IF YOU LIKE IT, PLEASE FAVOURITE IT!*
    Category: none
    Tags
    4190Free

    Lulzbot TAZ4 buildplate camera holder

    Lulzbot TAZ4 buildplate camera holderyoumagine.com
    Made a little arm that can hold a camera, for ex. a GoPro for timelapse recording of prints.This is just the base and will require for ex. a gopro mount or a raspberry pi camera mount to be added for full functionality.more here:
    Category: none
    Tags
    5202Free

    Fatshark 600TVL Adapter for QAV250

    Fatshark 600TVL Adapter for QAV250youmagine.com
    Fatshark 600TVL front plate adapter for the Lumenier QAV250 CF
    Category: none
    Tags
    7610Free

    Camera-Clip-Mount UNIVERSAL for Ultimaker2

    Camera-Clip-Mount UNIVERSAL for Ultimaker2youmagine.com
    This is a 2 part design to install a Cam to view the print of the Ultimaker 2.Simply stick all parts together (may be you have to drill the holes with 8mm drill bit) and click it to the Ultimaker2 front frame.You just need these two parts and an aluminum (or other) stick or pipe with 8mm diameter. The length of the stick or pipe is depending on your camera and the view angle. To fix the camera at Part2 you can easily use zip ties.
    Category: none
    Tags
    7299Free

    Banana Pi Camera Mount

    Banana Pi Camera Mountyoumagine.com
    Banana Pi Camera Mount
    Category: none
    Tags
    5927Free

    Ultimaker 2 Foscam Mount

    Ultimaker 2 Foscam Mountyoumagine.com
    This design allows the standard Foscam Wall Mount (FI9821W etc) to be attached to the Utimaker 2. Thanks to feedback from Mutrax, this has now been re-designed to clip externally with plenty of clearance to the printer internals.
    Category: none
    Tags
    4806Free

    DaVinci 1.0 iPhone (Camera) mount

    DaVinci 1.0 iPhone (Camera) mountyoumagine.com
    DaVinci 1.0 iPhone (Camera) mount
    Category: none
    Tags
    5622Free

    Raspberry and Raspicam mount for Ultimaker 2

    Raspberry and Raspicam mount for Ultimaker 2youmagine.com
    A mount for a Raspberry case.The one is used is: http://www.thingiverse.com/thing:209100 [1]Print one of each STL to complete (for left version choose Left Hanger, for right version choose Right Hanger)I found it better to be mounted on the left front side of the printer.The mount can be flexed a bit to be attached on the case (it shouldn't break). I used the following settings for all the part:0.2mm layers, 0.8mm shell thickness, 24% infill.You will need a couple of M3 screws and Nuts (i used 12mm screws).The arm for the camera can be moved in order to find the best position to take timelapses.If you need to created different arms:Screw holes are 3.2mm, height: 3.5mm width: 10mmThere is a version remixed for the UMO:https://www.youmagine.com/designs/raspberry-mount-for-ultimaker-original [2]Thanks to the remixer ;)[1] http://www.thingiverse.com/thing:209100[2] https://www.youmagine.com/designs/raspberry-mount-for-ultimaker-original
    Category: none
    Tags

    Printrbot Simple Corner Accessory Mount

    Printrbot Simple Corner Accessory Mountyoumagine.com
    Designed to clamp to the front right corner of the Printrbot Simple with a self- threading hole. Primarily made for a camera mount, however, may need an additional part to adjust camera angle. Add-on designs coming soon.NOTE: this is a press-fit design. May need to provide some extra force when mounting to the printer for the first time. This model was printed with 1 perimeter, and only 1 solid layer on the top and bottom. Reprinting with 3 perimeters led to a mount that did not fit together well. It is suggested that you print with only one perimeter or adjust your settings for a better fitting part. Alternatively, you can use sandpaper to open up the slots. Designed By: Tommy BertkenThe Printrbot Printrn
    Category: none
    Tags
    5424Free

    Printrbot Simple Corner Accessory Mount- Drop In

    Printrbot Simple Corner Accessory Mount- Drop Inyoumagine.com
    A rendition of the previous corner mount, but redesigned to use only drop-in hardware. No hack saw required to cut bolts or threaded rod.This model was printed with 1 perimeter, and only 1 solid layer on the top and bottom. Reprinting with 3 perimeters led to a mount that did not fit together well. It is suggested that you print with only one perimeter or adjust your settings for a better fitting part. Alternatively, you can use sandpaper to open up the slots. Designed By: Tommy BertkenThe Printrbot Printrn
    Category: none
    Tags
    5487Free

    GoPro SeatPost Mount (25.4mm)

    GoPro SeatPost Mount (25.4mm)youmagine.com
    A GoPro camera mount for the small diameter Cannondale Synapse 25.4 mm seatpost.  Uses two 6/32 x 1/2 in screws and nuts to secure to the seatpost and a standard GoPro nut and thumb screw for the camera attachment point.Printed with the following settings to obtain a strong, but light (10g), mount:- ABS- 40% infill- 0.8 mm shell- 0.6 mm base- Brim- Support Touching build PlateI also tested this part with PLA and it worked file as well.  With PLA, I needed to use a Raft instead of Brim support for the best print.
    Category: ELECTRONICS / GoPro
    Tags
    123200Free

    FPV250 tilt camera mount

    FPV250 tilt camera mountyoumagine.com
    A Tilt mount for larger board cameras for the front of the FPV250 from Hobbyking / Diatone.  Max camera size: 40x40mm  It has holes where all my cameras have cables...  Alternative version of the mount for other quads / planes are included.Alternative camera backplates are included for mounting the camera lower / from the bottom (as on planes)Needs a small servo for tilt.FPV250 frame can be obtained from here:  [ARF, with motors, ESCs, battery](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=52863&aff=1090853 [1])  [Bare frame only](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=47075&aff=1090853 [2])  Cameras taken into account:  [420TVL](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=11977&aff=1090853 [3])  700TVL Sony with OSD control connector (in metal housing)  [1] http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=52863&aff=1090853[2] http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=47075&aff=1090853[3] http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=11977&aff=1090853
    Tags

    Camera Mount/Bracket for DJI Elegant F330 Quadcopter

    Camera Mount/Bracket for DJI Elegant F330 Quadcopteryoumagine.com
    I got a camera for FPV (First Person View) for my quadcopter/drone. The camera sends live video back to a screen to see from the drone's point of view. I asked the salesman how to attach it. At that time, a folded piece of duct tape held the camera to the mounts. I decided to create my own 3D-printable bracket that attaches directly to my quad-copter (I have a DJI 330 Elegant Quadcopter) using zip ties. The camera sleeve fits a camera with the dimensions of 30x30x12.5mm in the main body and a lense with a width of 16mm.
    Tags
    3609Free

    Camera Mount/Bracket for DJI Elegant F450 Quadcopter

    Camera Mount/Bracket for DJI Elegant F450 Quadcopteryoumagine.com
    I got a camera for FPV (First Person View) for my quadcopter/drone. The camera sends live video back to a screen to see from the drone's point of view. I asked the salesman how to attach it. At that time, a folded piece of duct tape held the camera to the mounts. I decided to create my own 3D-printable bracket that attaches directly to my quad-copter (I have a DJI F450 Quadcopter) using zip ties.The camera sleeve fits a camera with the dimensions of 30x30x12.5mm in the main body and a lense with a width of 16mm.
    Tags
    5761Free

    Ball Joint Attachment

    Ball Joint Attachmentyoumagine.com
    A ball joint designed to mount onto the Printrbot Simple Corner Mount. Designed with drop-in 1/4 20 hardware and simple mechanism made with M3 hardware to tighten the hold on the ball.NOTE: The ball features a cut out for a hex bolt on both ends of the part. This was only to give the user the option on how to assemble the part. You can drop a machine screw through the top and push a bolt in the bottom to lock it in place, or you can drop a hex bolt through the top. Designed by: Tommy BertkenThe Printrbot Printrn
    Category: none
    Tags
    4435Free