This is a small storage box that can be used around the house or on a desk. However, unlike a conventional box, this has two lids so that you can open the main lid without accessing both compartments – a cool little feature that makes this box a little different.The box prints easily with your preferred printer settings. As we didn’t have much time we printed our box with a shell thickness of 0.4mm, layer height of 0.25mm and an infill of 10%. For better results we would suggest a higher shell thickness, infill and a lower layer height. We printed ours with our very own superb quality Blue PLA plastic.Check out http://www.3dexfilament.co.uk for all of your filament needs and stay up to date with our designs and products.Enjoy!
This is a multicolored case for the OpenWorkbench LogigSniffer board.It was printed on my Rapman with colored PLA. The color changes where done with exchanging the filament midprint, which works fine if you are able to pause your print.You can read more about this on ifeelbeta.de  http://www.ifeelbeta.de
This box matches the Stacking screw and tool boxes but instead of a solid base, I've used a grid of 1.6 mm i.e. 2 perimeters at 0.4 mm nozzle so that it prints quickly (about an hour at 0.3mm layer height)Insert a piece of card/paper (195 mm * 95 mm) into the base before use.There's a SCAD file it you'd like to play...
I have two vent valves (don't know the real name) in my shower. And because you always need storage I desigend a platform you can hook at this two valves.After I printed version 1 I noticed that the valves have a brim (...). My secound print with version 2 wasn't really good because of a print temperature problem. I also decided to edit the shape a little bit and add some brim. This brim helped much to prevent warping.Version 4 and 5 have just very minor changes.
If you need to store stuff in letters, this is the way to go! Use the customizer to adapt the text and sizes as needed.Each letter and also the dots of 'i' and 'j' are connected together, so after printing it will not fall apart.If you like it, also check out my configurable text based creations,pyramid text , name plate , round text  and sweeping name plate .Have fun!Customizable text storage  by makkuro  is licensed under the Creative Commons - Attribution - Share Alike  license.  https://www.thingiverse.com/thing:745296 https://www.thingiverse.com/thing:714444 https://www.thingiverse.com/thing:681203 https://www.thingiverse.com/thing:678211 https://www.thingiverse.com/thing:749887 http://www.thingiverse.com/makkuro http://creativecommons.org/licenses/by-sa/3.0/