Box 3D model for printing: 2505 results found

Displaying 769 - 800 of 2505
  • Free
  • Decoration of an interior 3D print model

    Decoration of an interior 3D print modelcgtrader.com
    Decoration of an interior
    Category: none
    Tags

    Wide bore drip tip with spiral insides 3D print model

    Wide bore drip tip with spiral insides 3D print modelcgtrader.com
    A dip tip that stops juice from poping or just juice build from getting into your mouth. It also helps with running at higher wattages/temps by making the experience more comfortable. You can either buy O-rings to fit it or just use small hair ties like i did.
    Category: none
    Tags

    ornamental basket 3D print model

    ornamental basket 3D print modelcgtrader.com
    An ornamental basket. Inspired by russian ivory carving patterns. Created in zbrush and checked in netfabb. Enjoy!
    Category: none
    Tags

    Screw Box 3D print model

    Screw Box 3D print modelcgtrader.com
    Screw box with cover.Multiple versions (1, 2 or 3 compartments)You can stack them.Use the support in order to easily arrange the boxes.
    Category: none
    Tags

    box for small parts 3D print model

    box for small parts 3D print modelcgtrader.com
    box for small parts 3D print model
    Category: none
    Tags

    Cube With Holes 1 3D print model

    Cube With Holes 1 3D print modelcgtrader.com
    Model has clean topology and is additionally delivered in OBJ format, that makes it useful as traditional CG model too.
    Category: none
    Tags

    DOMOCLIP 3D print model

    DOMOCLIP 3D print modelcgtrader.com
    The container and lid each feature a bottom surface with concentric ridges, designed to make raft removal easy, and it does. DOMOCLIP can be used right off the printer, or finished with a self-adhesive felt, foam or rubber bottom pad; the wider outer ring provides extra grip surface for the pad.
    Category: none
    Tags

    Tardis Iphone 5 Case 3D print model

    Tardis Iphone 5 Case 3D print modelcgtrader.com
    A Tardis themed Iphone 5 case.
    Category: none
    Tags
    110$3.00

    Arcadia Harlock ship box casket 3D printable model 3D print model

    Arcadia Harlock ship box  casket 3D printable model 3D print modelcgtrader.com
    Pirate ship is well-suited for storing your valuables. Meet, Box Arcadia Harlock ship!_________________________The model is printed in parts._________________________Assembled length model 200mm.### Tell your price to the right -> Offer your price ###You can change the size without any loss of quality.The model is fully prepared for 3d printing.Any questions? Please contact me.
    Category: none
    Tags

    Santa is stuck 3D print model

    Santa is stuck 3D print modelcgtrader.com
    Looks like Santa is having some problems.
    Category: none
    Tags

    TARDIS Lamp or Circa 1960s London Police Call Box 3D print model

    TARDIS Lamp or Circa 1960s London Police Call Box 3D print modelcgtrader.com
    Get your Whovian on with this six one-hundredths scaled model of a circa 1960s London Police Call Box. This TARDIS lamp stands at 7.75 inches tall with a base of 3.75 by 3.75 inches. The model includes a standard base for an A19 size, 60-watt compatible LED light bulb or a candelabra base for an LED candelabra bulb. Other assembly components not included are an 8 inch white cord set with switch, a 250-watt ceramic hard-wired ceiling socket or 2 inch candelabra socket (see pics or Standard Base Assembly Instructions or Candelabra Base Assembly Instructions). The recommended filament color is blue. For the best and most detailed results, set the extrusion speed at 20mm/s for the Lamp Top component. This translates into a Fine or Detailed setting if streaming. The streamed files follow this order: Candelabra Base, Standard Base, Middle and Top.
    Category: none
    Tags

    Girl boxer 3D print model

    Girl boxer 3D print modelcgtrader.com
    Girl boxer 3D print model
    Category: none
    Tags

    Apple watch donat shape gift box 3D print model

    Apple watch donat shape gift box 3D print modelcgtrader.com
    Donat shape gift box for you to present some one a nice gift.
    Category: none
    Tags

    Pencil holder 3D print model

    Pencil holder 3D print modelcgtrader.com
    A simple and beautiful pencil holder with twisted octagon.Look great on your desktop !
    Category: none
    Tags

    StormTrooper LED Light/Nightlight

    StormTrooper LED Light/Nightlightpinshape.com
    Here's a video of it in action...https://www.youtube.com/watch?v=7AHuQhO-CkgHere's a group I made for my LED lights and things, if you like my LED designs, join the group and you'll be updated as I upload new ones... I plan on making a lot more logos just like this. So if you have and suggestions, please tell me and I'll make it.http://www.thingiverse.com/groups/things-with-leds/thingsThis is a extruded LED StromTrooper I printed on my dual extruder... I took a JPEG of the StromTrooper and traced it in Solidworks... I then extruded and filleted the StromTrooper and saved it as its own STL to be used in dual extrusion... I then designed a plate around the StromTrooper, added holes for screws and save that as its own STL... Lastly, I design a shell to go around the plate and StromTrooper, the shell has aligned screw holes so it can be fastened to the plate...I then printed the shell in regular ole black PLA on my Rep 2... And I did the dual extrusion using the same black PLA for the plate and I used Bendlay (link below) to print the StromTrooper... I used Bendlay because it is extremely translucent (91% of light passes through)...I then hooked up an RGB LED strip, wrapped it around the inner shell and hooked it up to an IR receiver so it can be controlled with a remote...Bendlay Link:http://www.amazon.com/MatterHackers-BendLay-Filament-1-75mm-MakerBot/dp/B00K1NRCIY/ref=sr_1_1?ie=UTF8&qid=1435347958&sr=8-1&keywords=bendlay&pebp=1435347954416&perid=1WG2SRVP9TGP9WAM748WI've also made the following logo's, designs for LED hookup...SuperMan: http://www.thingiverse.com/thing:905146Punisher: http://www.thingiverse.com/thing:905140Transformers Autobot: http://www.thingiverse.com/thing:903550Transformers Decepticon: http://www.thingiverse.com/thing:903558IronMan: http://www.thingiverse.com/thing:904807Jeep Emblem: http://www.thingiverse.com/thing:908360Batman: http://www.thingiverse.com/thing:908353SpiderMan: http://www.thingiverse.com/thing:904822Mortal Kombat Logo: http://www.thingiverse.com/thing:904811Full Makerbot Logo: http://www.thingiverse.com/thing:899723Makerbot 'M' logo: http://www.thingiverse.com/thing:903428Apple Logo: http://www.thingiverse.com/thing:903448Android Robot: http://www.thingiverse.com/thing:903441MakerFaire Robot: http://www.thingiverse.com/thing:900647I <3 3DPing w/beating heart: http://www.thingiverse.com/thing:900678lightitup
    Category: none
    Tags
    143Free

    Mortal Kombat LED Light/NightLight

    Mortal Kombat LED Light/NightLightpinshape.com
    Here's a video of it in action...https://www.youtube.com/watch?v=MPQydDfa1mAHere's a group I made for my LED lights and things, if you like my LED designs, join the group and you'll be updated as I upload new ones... I plan on making a lot more logos just like this. So if you have and suggestions, please tell me and I'll make it.http://www.thingiverse.com/groups/things-with-leds/thingsThis is a extruded LED Mortal Kombat Logo I printed on my dual extruder... I took a JPEG of the Mortal Kombat Logo and traced it in Solidworks... I then extruded and filleted the Mortal Kombat Logo and saved it as its own STL to be used in dual extrusion... I then designed a plate around the Mortal Kombat Logo, added holes for screws and save that as its own STL... Lastly, I design a shell to go around the plate and Mortal Kombat Logo, the shell has aligned screw holes so it can be fastened to the plate...I then printed the shell in regular ole black PLA on my Rep 2... And I did the dual extrusion using the same black PLA for the plate and I used Bendlay (link below) to print the Mortal Kombat Logo... I used Bendlay because it is extremely translucent (91% of light passes through)...I then hooked up an RGB LED strip, wrapped it around the inner shell and hooked it up to an IR receiver so it can be controlled with a remote...I've also made the following logo's, designs for LED hookup...SuperMan: http://www.thingiverse.com/thing:905146StormTrooper: http://www.thingiverse.com/thing:905142Jeep Emblem: http://www.thingiverse.com/thing:908360Batman: http://www.thingiverse.com/thing:908353Punisher: http://www.thingiverse.com/thing:905140IronMan: http://www.thingiverse.com/thing:904807Transformers Autobot: http://www.thingiverse.com/thing:903550Transformers Decepticon: http://www.thingiverse.com/thing:903558Full Makerbot Logo: http://www.thingiverse.com/thing:899723Makerbot 'M' logo: http://www.thingiverse.com/thing:903428Apple Logo: http://www.thingiverse.com/thing:903448Android Robot: http://www.thingiverse.com/thing:903441MakerFaire Robot: http://www.thingiverse.com/thing:900647I <3 3DPing w/beating heartt: http://www.thingiverse.com/thing:900678Bendlay Link:http://www.amazon.com/MatterHackers-BendLay-Filament-1-75mm-MakerBot/dp/B00K1NRCIY/ref=sr_1_1?ie=UTF8&qid=1435347958&sr=8-1&keywords=bendlay&pebp=1435347954416&perid=1WG2SRVP9TGP9WAM748Wlightitup
    Category: none
    Tags
    153Free

    MR. MEESEEKS (v1) and Meeseeks Box (final)

    MR. MEESEEKS (v1) and Meeseeks Box (final)pinshape.com
    I'M  MR.MEESEEKS!! LOOK AT ME!!!Hey guys and gals, ive had trouble recently keeping things organized and went over to my friend Rick Sanchez and asked if he had anything I could use to make my job easier. Rick was cool enough to lend me his meeseeks box so that i can duplicate the process and help everyone in need. REMEMBER! be specific with your request if not, you are going to have one hell of a time.If you would like to see what new projects I am working on follow me on TWITTER: https://twitter.com/carmelo_nazario [1]If you would like to help me keep making free designs please help support with whatever you can on my patreon page. https://www.patreon.com/TheCre... [2]hope you have fun guys/gals. MAY THE GEEK BE WITH YOU![1] http://www.twitter.com[2] https://www.patreon.com/TheCreatorx3D
    Category: none
    Tags

    SPIDERMAN LED Light/Nightlight

    SPIDERMAN LED Light/Nightlightpinshape.com
    Here's a video of it in action...https://www.youtube.com/watch?v=Vd5MmwI2kooHere's a group I made for my LED lights and things, if you like my LED designs, join the group and you'll be updated as I upload new ones... I plan on making a lot more logos just like this. So if you have and suggestions, please tell me and I'll make it.http://www.thingiverse.com/groups/things-with-leds/thingsThis is a extruded LED SpiderMan Logo I printed on my dual extruder... I took a JPEG of the SpiderMan Logo and traced it in Solidworks... I then extruded and filleted the SpiderMan Logo and saved it as its own STL to be used in dual extrusion... I then designed a plate around the SpiderMan Logo, added holes for screws and save that as its own STL... Lastly, I design a shell to go around the plate and SpiderMan Logo, the shell has aligned screw holes so it can be fastened to the plate...I then printed the shell in regular ole black PLA on my Rep 2... And I did the dual extrusion using the same black PLA for the plate and I used Bendlay (link below) to print the SpiderMan Logo... I used Bendlay because it is extremely translucent (91% of light passes through)...I then hooked up an RGB LED strip, wrapped it around the inner shell and hooked it up to an IR receiver so it can be controlled with a remote...Bendlay Link:http://www.amazon.com/MatterHackers-BendLay-Filament-1-75mm-MakerBot/dp/B00K1NRCIY/ref=sr_1_1?ie=UTF8&qid=1435347958&sr=8-1&keywords=bendlay&pebp=1435347954416&perid=1WG2SRVP9TGP9WAM748WI've also made the following logo's, designs for LED hookup...SuperMan: http://www.thingiverse.com/thing:905146Jeep Emblem: http://www.thingiverse.com/thing:908360Batman: http://www.thingiverse.com/thing:908353StormTrooper: http://www.thingiverse.com/thing:905142Punisher: http://www.thingiverse.com/thing:905140IronMan: http://www.thingiverse.com/thing:904807Transformers Autobot: http://www.thingiverse.com/thing:903550Transformers Decepticon: http://www.thingiverse.com/thing:903558Mortal Kombat Logo: http://www.thingiverse.com/thing:904811Full Makerbot Logo: http://www.thingiverse.com/thing:899723Makerbot 'M' logo: http://www.thingiverse.com/thing:903428Apple Logo: http://www.thingiverse.com/thing:903448Android Robot: http://www.thingiverse.com/thing:903441MakerFaire Robot: http://www.thingiverse.com/thing:900647I <3 3DPing w/beating heart: http://www.thingiverse.com/thing:900678lightitup
    Category: none
    Tags
    144Free

    Ekobots - Wooden box puzzle.

    Ekobots - Wooden box puzzle.pinshape.com
    Funny wooden puzzle with hundreds of possibilities.It is a matriz 10 x 6 with 12 pieces of 5 cubes each, but different shapes.All you need is fit all in the box.Made in OpenSCAD, All parametric, you can change all.Easy to print.
    Category: none
    Tags

    Trunk with removable lid

    Trunk with removable lidpinshape.com
    Working on chests and boxes.  Figured that I would upload some of them.
    Category: none
    Tags
    Hitch Detailed 3d model of HTC Vive Set.- detailed enough for close-up renders- two *.max files included Standart materials and Vray-materials- hi-poly model with meshsmooth modifier- not colaps smooth modified- archives (3ds, obj, fbx, c4d, mb) contain smoothing model and initial- big size textures included- file format - max2009, 3ds, obj, fbx, c4d, mb included- original file format - max 2009- to all objects and materials in a scene names are appropriated- real world size (system units - mm)- coordinates of the location of the model in space (x0, y0, z0)- files with the model does not contain extraneous or hidden objects (lights, cameras, etc.)The model is completely ready for use visualization in 3ds max.All previews rendered 3ds max Vray.In formats c4d, 3ds, obj, fbx, mb - model exported to standard materials (textures), not contain Vray shaders.In these formats, shaders need to be edited for the new studio for the final rendering.
    Category: none
    Tags
    50$59

    5X5 Scrambled Rubik's Cube

    5X5 Scrambled Rubik's Cubecults3d.com
    This is best-selling game in the world.Rubik's Cube invented in 1974 by Ernő Rubik.
    Category: none
    Tags
    https://www.facebook.com/yoda3dprint [1][1] https://www.facebook.com/yoda3dprint
    Category: none
    Tags

    zZcube's Music Box (Tune Box)

    zZcube's Music Box (Tune Box)cults3d.com
    https://www.youtube.com/watch?v=wO3bNYCCWuM&feature=youtu.be [1][1] https://www.youtube.com/watch?v=wO3bNYCCWuM&amp;feature=youtu.be
    Category: none
    Tags

    Box and Cup Tutorial

    Box and Cup Tutorialcults3d.com
    If you enjoy this video, you may also be interested in the Blender for 3D Printing DVD that can be bought at the blender.org e-shop (this video is not on that disk, but is in the same style).http://www.blender3d.org/e-shop/product_info_n.php?products_id=160 [1][1] http://www.blender3d.org/e-shop/product_info_n.php?products_id=160
    Category: none
    Tags
    This is best-selling game in the world.Rubik's Cube invented in 1974 by Ernő Rubik.
    Category: none
    Tags
    This is best-selling game in the world.Rubik's Cube invented in 1974 by Ernő Rubik.
    Category: none
    Tags

    4X4 SCRAMBLED RUBIK'S CUBE

    4X4 SCRAMBLED RUBIK'S CUBEcults3d.com
    This is best-selling game in the world.Rubik's Cube invented in 1974 by Ernő Rubik.
    Category: none
    Tags
    Fair Pay Pizza
    Category: none
    Tags

    2x2 Scrambled Rubik's Cube

    2x2 Scrambled Rubik's Cubecults3d.com
    This is best-selling game in the world.Rubik's Cube invented in 1974 by Ernő Rubik.
    Category: none
    Tags

    Cup of Super Mario Bros. (Mystery Box)

    Cup of Super Mario Bros. (Mystery Box)cults3d.com
    And if you had the tea inside?
    Category: none
    Tags
    Thank you for your support!
    Category: none
    Tags