1010 3D model for printing: 15 results found

Displaying 1 - 10 of 15
1010 t-slot 90 degree corner bracket
======== SUMMARY =============================================================This is a remake of a 80/20 T-slot 1010 corner bracket designed by bgcheese. The original had some tight tolerance for 1/4-20 Flanged Bolt Screws, so i increased it to 1mm extra to allow for smooth sliding of those bolts.I will be releasing a doubled version for 1020...
Category: none
169 downloads13 views
NZXT Alien 1030 and 1010 AiO PC case idea Free 3D model
1030 :custom 27" AiO with a 800W platinum PSU which can stand 1x5.25" 2x3.5" 2x2.5" EATX mobo and up to 4 PCIE cards (2x PCIEx16 2 slot and 2x PCIEx1 1 slot)3D : http://goo.gl/7zlTyY1010 :custom 24" AiO with a 500W gold PSU which can stand 1x3.5" 1x2.5" ATX mobo and up to 2x 2 slot PCIE cards3D : http://goo.gl/...
Category: none
0 downloads11 views
Universal Filament Spool Rollers -  using 1" PVC & printed ends for 8mm rod
======== SUMMARY =============================================================I wanted a universal spool roller for my new custom printer, with a new Diamind Hotend (3-color mixing hotend) I needed a 3 spool roller that would be easy and quick to change out filament spools - I also wanted the ability to use multiple width and diameter spools -...
188 downloads17 views
80/20 1010 (10S) T-Slot Linear Bearing Multi-Pack
======== SUMMARY =============================================================This is a multi-pack for 3D printed replicas of standard commercial 80/20 brand linear bearings. I have experimented both with printing whole bearings and partial printed w/ bought pads. I think partially printed with purchased pads works the best, but pure printed ABS...
Category: none
1K downloads15 views
Rt angle 4 hole bracket 8020
======== SUMMARY =============================================================for combining 2 8020 rods when load bearing is NOT important======== INSTRUCTIONS ========================================================expanded on my 2 hole rt angle bracket
Category: none
138 downloads12 views
1010 rod 6 inch
======== SUMMARY =============================================================Tried to print it on its side. FAIL, how would i clean out the inner hole anyway . Use Sketchup then converted to .STL in sketchup extensions and print on my replicator 2 with makerware======== INSTRUCTIONS ========================================================...
Category: none
129 downloads10 views
UPDATED: 11/02/2017
8020 nut
======== SUMMARY =============================================================works but not real strong. Thread with a 1/4-20 tap
Category: none
82 downloads11 views
T slot Filament Holder remix
======== SUMMARY =============================================================I did a remix of this Thing 604530. I made it fatter and shorter. It fits a 1kg spool better. I also added a couple little nubs on top to reduce friction.I am using this with my M3D 8020 mounts and braces that you can find here.Mountshttp://www.thingiverse.com/thing:...
Category: 3D PRINTING / Filament
231 downloads16 views
1010 Extrusion T-Slot Simple 90 Degree
======== SUMMARY =============================================================Just a simple 90 degree fits the 1010 extrusions. I got mine from McMaster-Carr. The dimensions are 25mm x 30mm x 30mm. I have it setup to fit with the standard T-slot screws, 1/4-20, or M6 since I have a mixture of stuff wanted to make sure it would fit for all the...
Category: none
137 downloads11 views
8020cabletie
======== SUMMARY =============================================================cable tie attachment for 8020 gear fit in 1010 rod just insert and twist 90 degrees. attaches cables to 8020 structrures======== INSTRUCTIONS ========================================================drew a rectangle footprint. extruded it up and then punched more...
Category: none
90 downloads12 views