Christmas 3D model for printing: 235 results found

Displaying 225 - 235 of 235
  • Free
  • Make #7 - Tree Light

    Make #7 - Tree Lightyoumagine.com
    Slice with 2 shells (/perimeters) and 0% infill (the Tree Light is designed to be self supporting). At coarse resolution (~0.25mm), you will find prints extra shimmer (and print quicker!). Created in stunning Faberdashery Pearly White PLA. Object requires ~12g of material (~2m of 3mm / ~5m of 1.75mm filament). Place an LED 'Tea Light' (~38mm dia.) inside the hollow base (available on ebay), or for a simple hanging tree decoration, we've provided a smaller version.Faberdashery are releasing daily, seasonal designs for you to print and enjoy. Join in the fun with our 25 Days of Making!http://www.faberdashery.co.uk/25-days-of-making/ [1]This is Make #7 of 25. [1] http://www.faberdashery.co.uk/25-days-of-making/
    Category: GADGETS / Christmas
    Tags
    21419Free

    Make #23 - Stargazy Tree Topper

    Make #23 - Stargazy Tree Topperyoumagine.com
    Our Stargazy Tree Topper was inspired by Tom Bawcock's Eve, the festival held each year on the 23rd of December in the beautiful Cornish village of Mousehole (http://en.wikipedia.org/wiki/Stargazy_pie#The_Mousehole_Cat [1]). It commemorates the brave fisherman who saved the village from starvation just before Christmas. We love the magic of this story and the name of the pie eaten during celebrations. We just couldn'€™t resist making it part of our collection!  Slice with 2 shells (/perimeters) and 1% infill. At coarse resolution (~0.25mm), you will find prints have extra shimmer (and print quicker!). Created in stunning Faberdashery Galaxy Blue PLA. The tree topper requires ~12g of material (~2m of 3mm / ~4m of 1.75mm filament) and the hanging version ~4g of material (~1m of 3mm / ~2m of 1.75mm filament). Faberdashery are releasing daily, seasonal designs for you to print and enjoy. Join in the fun with our  25 Days of Making!http://www.faberdashery.co.uk/25-days-of-making/ [2]This is Make #23 of 25.  [1] http://en.wikipedia.org/wiki/Stargazy_pie#The_Mousehole_Cat[2] http://www.faberdashery.co.uk/25-days-of-making/
    Category: GADGETS / Christmas
    Tags
    5946Free

    christmas bells - tree decoration

    christmas bells - tree decorationyoumagine.com
    *we highly recommend slicing these bells with an OLD version of cura (e.g. 13.04) so you can use the 'joris' function for perfectly smooth results. The newer versions of Cura don't do a good job here (yet)*print a set of these fast lightweight bells and hang them in your tree, or string them along a ribbon to hang in the window.single wall will print fine (and fast)who dares to fork this and add lights ?
    Category: GADGETS / Christmas
    Tags
    1152Free

    Christmas Tree with space for led light

    Christmas Tree with space for led lightyoumagine.com
    Just a little Christmas Tree with space for a battery powered led light.With the standard size of the tree, a led light with a diameter of 3cm and a height of 2cm will fit in.Printed at 0.1 height, 1 perimeter and no infill.
    Category: GADGETS / Christmas
    Tags
    3226Free

    Christmas light Robot

    Christmas light Robotyoumagine.com
    This is an ulti-bot that you can print. With the file attached you can make an autoprint (if you run it in windows). It is designed so you can shove it over a Christmas light in your tree. It has a 10mm hole, so scale it accordingly until it fits over the lights you have in your tree! Note: The autoprint works for the Ultimaker Original only at this point.Instructions:-Unzip the folder.-Open the script.-Enter the amount of robots you want to print.-Autoprint is being generated.-Copy and paste the file on your SD card.-Use some 'used/old' tape, or wear it down with a bit of sandpaper, you don't want the robot to stick too well to your tape, or your printhead won't be able to push it off.-Start autoprint. Let the light shine in your house :)
    Category: GADGETS / Christmas
    Tags
    1219Free

    Christmas Pudding Tree Decoration

    Christmas Pudding Tree Decorationyoumagine.com
    To make this thing, print:- 1 x "main" icing- 1 x "top" icing- 1 x Pudding- 1 x Berries- 3 x LeafThe berries and leaves on the top of the pudding are optional, but they help hide a join between two parts, so make the thing look a lot more professional, and honestly, without them it looks a bit unfinished.Clean up all parts with a craft knife to get rid of any strings or lumps. You may also want to use a bit of sandpaper on the wavy edge of the main icing part so that it looks smoother when it's set against the dark colour of the pudding.The two icing parts glue together. I used a few tiny drops of super glue for this. Try to get the top aligned as well as possible on the main icing so that the join doesn't show too much.Next, preprepare the berries and leaves. The leaves print with a flat bottom and a slightly curved top. They also have a slight recess in the "fat" end of the leaf.The berries are quite small and are printed on a thin ring. This is quite fragile, but also slightly bendy. The trick is to glue the leaves onto the ring (top side downwards) so that the recess is over the ring. The idea is that the leaves will lay on to the icing (and can be glued in place if desired). I found that a tiny amount of super glue applied to the the berries ring was just enough to get the leaf to stick to it without "glooping" out and sticking to anything else. I was then able to get the angle of the leaves just right by laying them on top of the icing until the glue had stuck. It's all a bit fiddly, so take your time! Once done though, the berries and leaves should form a reasonably solid structure with a small hole in the middle for the string to go through.Next, take a piece of decorative string or narrow ribbon. Tie the ends together to make a loop and hook the loop around the arrow shape in the flat part of the pudding (with the knot inside the pudding). You may want to put another knot in the string just above the arrow shaped hook to ensure the string doesn't come off the hook later on.The icing has a small hole in the top. This was enough for me to thread a thin ribbon by pushing it through the hole with a strightend-out paper clip. However, if the hole is too small, then open it out with a craft knife or gently with a drill. Thread the string that's attached to the pudding through the underside of the icing so that the two parts interlock nicely. There's no need to do so, but you may want to glue the two parts together at this point (personally, I didn't do this as it's fun to show people how it's constructed).Lastly, carefully thread the berries/leaves assembly onto the string and push it down so that it sits directly on the icing. Be gentle so that you don't accidentally break any of the the leaves off the berries though.Congratulations! You just made a christmas pudding on your 3D printer!---I'd recommend printing the two icing parts, the berries and the leaves in as high quality as you can manage. On my machine the icing parts took about 90 minutes to print in high quality; the berries and leaves just take a few minutes each. The pudding part takes about an hour in normal quality, although I tend to use Cura's "skin" option to make it look it's higher quality. You could use high quality for it too, but it'll take over two hours to print (and doesn't actually improve it all that much).I'd also recommend starting with the lightest colour fillament and working towards the darkest - since quite a few colour changes are required, avoiding having a dark patch in your white icing is rather a good idea!The pudding part is hollow, so don't worry about infill settings too much (true for all parts - something like 15 - 30% infill is plenty). I used PLA for all parts.I've included the Sketchup source files in case anyone wants to make any derivatives. It's possible you could scale up the berries and leaves to make them a bit less fiddly (it might even be possible to do this directly with the STL files - I'm not sure).
    Category: GADGETS / Christmas
    Tags
    Two pieces of chess to play in christmas time. The King of the game is the tree and the pawn is represented by the christmas balls.
    Category: GADGETS / Christmas
    Tags
    2388Free
    Just another Christmas TreePrint all parts once but the ornaments twice.Use glue to assemble the parts.
    Category: GADGETS / Christmas
    Tags
    0588Free

    Christmas Lights Tardis

    Christmas Lights Tardisyoumagine.com
    Christmas Lights Tardis
    Category: GADGETS / Christmas
    Tags
    none
    0156Free

    Christmas decorations

    Christmas decorations3dfilemarket.com
    Decorate your Christmas tree with this 3dprinted snowflake. Quick and easy to print.
    Category: GADGETS / Christmas
    Tags
    514Free

    Spelling Snowmen Christmas Ornament

    Spelling Snowmen Christmas Ornamentthingiverse.com
    These three snowmen rotate randomly and spell words. The snowmen were made from clay and scanned with a MakerBot digitizer. Video: http://youtu.be/2
    Category: GADGETS / Christmas
    Tags
    0746Free