GoPro Hero 3 boxyoumagine.com
Box for a naked GoPro Hero 3 camera. The camera is put in the bottom part with lens down. This way there was room for 4 Micro SD storage slots. On top of the box the text "GoPro Hero3" is engraved.It uses my jewelbox.scad (https://www.youmagine.com/designs/parametric-jewelbox) and  write.scad from *HarlanDMii* (http://thingiverse.com/thing:16193  for complete set of fonts to go with write.scad).*Update:* made the scad file more adaptable by adding global variables at the top of the file. The following variables are added (all values are in mm).*gpx:* X dimension of GoPro Hero 3 camera.*gpy:* Y dimension of GoPro Hero 3 camera.*gpz:* Z dimension of GoPro Hero 3 camera.*gpl:* height of lens above main camera body.*gpo:* overlap between to and bottom parts.*gpw:* width of the walls of the box. Keep in mind that the wall thickness at the overlap is (gpw - gpg) / 2. This means with a gpw of 2mm and a gpw of 0.4mm the walls at the overlap are (2 - 0.4) / 2 = 0.8mm (twice my nozzle size) which worked perfectly for me.*gpg:* gap between top and bottom parts (wiggle space). Tune this to get good fit between top and bottom parts. For me the 0.4 (size of nozzle) worked perfectly.*gpt:* depth of the engraved "GoPro Hero3" text on top part. Set to 0 if you don't want any text engraved. https://www.youmagine.com/designs/parametric-jewelbox) and http://thingiverse.com/thing:16193
Walkera G2d Gimbal to GoPro Fig Rignunus-world.com
Modified mount for the Fig Rig that Thumber posted.(http://www.thingiverse.com/thing:719230 )This adapter allows a person to use the Walkera G2d Gimbal with Thumber's Fig Rig. Use a 2200ma 3s lipo battery and you can power the gimbal and the Gopro for hours of recording.Use zipp ties to mount the control board and battery. The light blue box in the image represents the space the gimbal and Gopro need (3"x4" -- 76.2 x101.5mm). Looks like everything will fit fine.I have not printed this setup yet but the Walkera mount I have printed. Just remove the 2 hex bolts from the gimbal and use those same bolts to mount the gimbal to the adapter.Walkera G2d Gimbal to GoPro Fig Rig  byDroneme  is licensed under the Creative Commons - Attribution - Share Alike  license. http://www.thingiverse.com/thing:719230 http://www.thingiverse.com/thing:720144 http://www.thingiverse.com/Droneme http://creativecommons.org/licenses/by-sa/3.0/
Dual GoPro Dive Traynunus-world.com
This is a dual GoPro Dive Tray for the Hero 3,3+,4 camera. The top two GoPro mounts will be for two knog qudos underwater lights.Version 2: - added fillets to the gopro adapters, cut model in half to print on smaller printers.Dual GoPro Dive Tray  by BrianN  is licensed under the Creative Commons - Attribution - Non-Commercial  license.  http://www.thingiverse.com/thing:682911 http://www.thingiverse.com/BrianN http://creativecommons.org/licenses/by-nc/3.0/
GoPro SkiPole - Mount smallcults3d.com
I had chance to have another look at these and revised them a little bit more.I Have added my own temp. supports(you may need to re orientate it on the bed, those circular discs are the temp supports and should be on the bottom, ie on the print bed, they break off easily once the print is complete).I stripped some out some lengths and thicknesses, to save on print time and material etc,modified the circular grip / slot to a three point flat grip,(should allow it to be used with a bigger variety of ski pole sizes),made the ziptie holes thinner, added some radius to allow the zipties to grip better.
GoPro Extension (75 mm, rotated)nunus-world.com
This is a simple rotated element compatible with the GoPro mounting system. It measures 75 mm from axle to axle.There are other version, too: 50 mm, straight  50 mm, rotated  75 mm, straight GoPro Extension (75 mm, rotated)  by hcc23  is licensed under the Creative Commons - Attribution - Share Alike  license. http://www.thingiverse.com/thing:454200 http://www.thingiverse.com/thing:728371 http://www.thingiverse.com/thing:454206 http://www.thingiverse.com/thing:728378 http://www.thingiverse.com/hcc23 http://creativecommons.org/licenses/by-sa/3.0/
GoPro Universal fixturemyminifactory.com
Go pro is a great thing and we make it even greater with this accessory which allows you to attach it virtually everiwhere with just two cable ties. Helmet, bike frame, railings, pipes ... just choose the right lenght of the ties and go wild. You will need one standard M5 bolt 50mm long and an M5 nut or dome nut.
MoPro LensB (Mobius - GoPro Conversion Case)redpah.com
MoPro LensB (Mobius Action Cam - GoPro Conversion Case)This Case is for the Wide Angled Lens (Lens B) there is also a MoPro Lens A (Standard Lens)If You do not have a 3D Printer you can buy this from our website store at. http://www.RcHobbysUK.co.uk Lens Extension cable is needed also available from our website http://www.RcHobbysUK.co.uk We have also designed a MoPro Skeleton Case for use with gopro attachments and a 2 Axis / 3 Axis Brushless gimbal will be avalible soon and we have included a couple of pictures of the gimbal in test stages.This has been on our list of things to design for a while now and finally its finished.This case will transform your Mobius Action Cam to the MoPro, Sizes match the GoPro Hero 3 Exactly and it also weighs the same.There is a few conversion kits on the market to do this but they have no took into account the weight factor. The whole idea was to make this the same size to fit all of the top GoPro Brushless Gimbals out there which other companies have done but overlooked the weight. The most crucial part of the setup is getting the balance right on the gimbal with the cam on. All of the GoPro gimbals on the market have been designed around the GoPro's size and weight so its balanced perfectly,These company's that have made Mobius Conversion kits have made them to fit these gimbals but the weight is all wrong its too light so its pretty pointless why make a conversion kit for gopro gimbals that just wont work.Anyway this one will, Enjoy. http://www.rchobbysuk.co.uk/ http://www.rchobbysuk.co.uk/